Akura APL2YR2268UH Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für LCD-FERNSEHER Akura APL2YR2268UH herunter. Akura APL2YR2268UH 2 Seiten. Msd306

WATCHING TV (basic operation)

12.

Adjust the volume to the desired level using the volume button on the TV or Remote control. The sound can be

silenced by pressing the MUTE button on the remote control and a mute symbol will appear on the screen. Press the

MUTE button a second time to restore the sound.

13.

To switch off the TV for short periods, press the POWER button. The TV will go into standby mode and the LED

indicator will change to red. If not using the TV for extended periods turn off at the mains switch to conserve

electricity, all settings will be retained.

Although the Flat screen is made with high precision technology and 99.9% or more of the pixels are effective, dots may

appear. These can be black or bright dots (red, green or blue) and may appear constantly on the Flat screen. This is a

structural property of the Flat panel and is not a malfunction.

To fit the base plate.

Place the TV face down on a suitable surface with the base mounting facing you (Fig 10).

Apply the base plate to the base mounting and fit the four screws provided. Tighten the four screws using a "Posi No 1"

screwdriver.

To mount the TV on a wall you need to purchase a VESA Standard (100mm) bracket.

Remove the screws as shown above.

Mount the wall bracket as described by the manufacturer.

Mount the TV to the wall bracket using 4 x 4mm x 10mm set screws. (Do NOT use longer screws as the internal parts of

the TV may be damaged).

Akura accepts no responsibility for damage, caused to or by, incorrect mounting of the wall bracket.

There are many variations of Wall Mounting Brackets.

The "ARM" variety allow a greater movement of the TV into the viewing angle required.

The "Fixed Tilt" variety allow up and down Tilt.

The Fixed "Non Tilt" variety are fixed very close to the wall. To ensure suitable clearance of the Mains Plug, 4 x spacers

are provided. Attach these to the TV cabinet back and tighten before fitting the Wall Bracket plate.

Flat Screen

Base fitting and removal.

Fig.10