Bobot MOP 9030 Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Dampfreiniger Bobot MOP 9030 herunter. Bobot MOP 9030 6 Seiten. Multi-function cordless electric spin mop & waxer

Installation

1
2

Operation

1) Choose Cleaning Cloths
Generally the mopping cloths (in orange or pink) are for mopping, while the
Generally the mopping cloths (in pink) are for mopping, while the waxing cloths (in
waxing cloths (in blue or green) are for waxing.
blue or green) are for waxing.
Please choose the ideal cloths and velcro them to rotating pads
Mopping Cloth

2) Water/Liquid Filling

Use a measuring cup to fill the water tank with clean water for wet mopping, fill it
with waxing oil if you want to polish/wax wooden floor.

3) Turn ON/OFF Switch

A) Step slightly on the Power Switch, LED Light turns on, you can start using it now;
B) Step slightly on the Power Switch after use, LED light turns off, the machine is off.
If you keep the machine standby for 10 minutes above, it will enter SLEEPING mode
automatically, step on the Power Switch twice to wake it up.

4) Start/Stop, Liquid Spray

Press Start/Stop button to start waxing/mopping;
Press Liquid Spray button to spray water/detergent/cleaning solution/waxing oil
Remarks: when you press the Start/Stop button or Liquid Spray button, the handle
incidator light should be on and red. If the light is not on, please put AAA battery in
the handle battery box, and then restart the machine.

5) Battery Indicator Light

There are three levels of battery capacity, which is
indicated on the detachable battery pack; three
green lights refer 100% battery, two green lights refer
65% battery, and one green light refers
battery, you need to recharge it.

6) Charging

Please only use original adapter supplied by the manufacturer for recharge.
Please charge it when there is only one green light on the detachable battery
pack.
The battery pack is replaceable, however please only use original detachable
battery pack supplied by the manufacturer. Other battery pack may destroy your
device. If you've been using the battery for over 1 year and the machine can only
work for less than 15 minutes after full charging, please replace it with new battery
pack.
Upper Side Aluminum Tube
Insert the tube into the upper
handle until the spring stud is fully placed
Lower Side Aluminum Tube
Insert the tube into the joint of
machine until the spring stud is fully placed
(orange)
% and low
3
Waxing Cloth
65%
100%
%