Bobrick 1085 Installationsanleitung Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Toiletten Bobrick 1085 herunter. Bobrick 1085 10 Seiten. Urinal screens, benches & shower seats

Seite drucken
BENCH/SHOWER SEAT INSTALLATIONS
STEP 1
Fig. 1c: Shower Seat 1080/1180 Series
Phenolic Shower Seat
Bracket
''D''
Finish Face of Floor
FINISHING AND CLEANUP
A. Remove any exposed labels from the components.
B. Clean surfaces as needed. CAUTION: Do not use cleaners containing acid on Bobrick toilet compartments.
For example, tile cleaners containing acid may attack the stainless steel hardware.
For Bobrick recommendations, refer to Bobrick Advisory Bulletins Nos. TB-21 and TB-60.
Form No. 1045-69 r5/21/14
Masonry Wall
© 2014 Bobrick Washroom Equipment, Inc.
A. Mark holes on one side of shower seat using mounting
brackets as templates. Mounting holes to be 3"
maximum from each end of seat.
B. Drill #19 x 3/8" deep holes in seat. Caution: Do Not
Drill Through.
C. Attach brackets with #1002499 screws.
D. Support seat so that height of seat complies with local
building codes. Seat must be level with the floor in all
directions and mounting brackets must be flat against
the panel.
E. Using brackets as templates mark and drill #19
(4.2mm) into wall 2" (50mm) deep.
F.
Attach brackets to wall with #1002495 screws.
G. Test and examine seat and fasteners and brackets to
make sure there are no loose parts.
Printed in U.S.A.
Page 9