Euro-Pro GI460 W Handbuch für Gebrauch und Pflege - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch für Gebrauch und Pflege für Eisen Euro-Pro GI460 W herunter. Euro-Pro GI460 W 6 Seiten. Garment steamer/iron 115/120v., 60 hz., 230/240 v., 50 hz. 800 watts/870 watts
Seite drucken
TROUBLESHOOTING
PROBLEM
POSSIBLE REASONS & SOLUTIONS
• Make sure that the plug is securely in the socket.
Garment Steamer/Iron
• Temperature setting too low.
does not heat
Turn to higher setting.
• This is normal.
Pilot light
The light goes On and Off as the thermostat is
goes On and Off
switching the heating element On and Off to
maintain the selected temperature.
Some odor or small
• This is normal.
particles come out of
Follow instructions for first use and allow iron to steam
steam vents of new
through 2-3 fillings & press the steam trigger
iron
occasionally to eliminate small white particles.
Garment Steamer/Iron
• Water tank may be empty or water level is very low.
does not steam
Add water.
• Make sure that the temperature control dial is correctly
set. For maximum steam, (setting 'Max' on steam
control), temperature control dial should be set on '•••'.
• Make sure the iron has reached the selected
temperature by confirming that the pilot light has gone
"Off". For more steam, turn temperature dial to
higher setting, e.g. '•••'.
• If temperature setting is correct and there is no steam,
gently tap the soleplate on the ironing board a few
times. Move the temperature control dial from 'MIN' to
'Max' a few times.
• Iron may not be hot enough. Set temperature control
Water droplets coming
dial to the 'Max' position. Always allow iron sufficient
from steam vents
time to heat up (pilot light goes off).
• Overuse of steam trigger. Allow more time between
each burst.
• Iron may have been overfilled. Turn iron off,empty
water and follow instructions for filling.
• Steam performance may be low if iron requires
seasoning. To season, use regular tap water for 1or 2
tanks until steam performance improves.
9
GETTING TO KNOW YOUR GARMENT STEAMER/IRON
Technical Specifications
Voltage:
115/120 V., 60Hz.
230/240 V., 50 Hz.
Power:
800 Watts/870 Watts
2
1. Temperature Control Dial
2. Red Pilot Light
3. Steam Trigger
4. Water Inlet Cover
5. Red Lint Brush
6. Bristle Garment Brush
7. Locking Tab
8. Swivel Handle
9. Water Measuring Beaker
10. Dual Voltage Selector
(not shown)