Akura APTCDC832PR Gebrauchsanweisung - Seite 10

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Mikro-Musikanlage Akura APTCDC832PR herunter. Akura APTCDC832PR 16 Seiten. 3cd cassette player micro system

Seite drucken

TAPE OPERATION

Side A

DUBBING (DECK 2) TO (DECK 1)

This appliance enables you to duplicate a prerecorded tape to another tape by using the in-unit

double deck mechanisms. It is performed only one way, from deck 2 (playback) to deck 1 (recording).

DUBBING AT NORMAL SPEED

1. Press the "STOP / EJECT" button to open both cassette doors.

2. Insert a blank tape into deck 1 and a pre - recorded tape into deck 2.

3. Press the deck 1 "PAUSE" button and then press the "RECORD" button.

4. Press the deck 2 "PLAY" button to start recording.

DUBBING AT HIGH SPEED

1. Press the "DUBBING SPEED" button to select "HIGH" dubbing speed.

2. Press the "STOP / EJECT" button to open both cassette doors.

3. Insert a blank tape into deck 1 and a pre - recorded tape into deck 2.

4. Press the deck 1 "PAUSE" button and then press the "RECORD" button.

5. Press the deck 2 "PLAY" button to start recording.

Notes:

- Deck 2 is used for playback only. Deck 1 is used for both recording and playback.

- When the dubbing at high speed is in progress, do not release the "DUBBING SPEED" button,

since this will vary the speed of the program and ruin the recording.

Care Of Cassette Mechanism

Gently clean the tape head and pinch-wheel/capstan assemblies after every 10 hours

of use until all traces of oxide deposit have been removed. A rang e of cassette care

products are available.

RECORD/PLAY HEAD

CAPSTAN

ERASE HEAD

PINCH ROLLER

The erase head and record/play head and the surface of the pinch roller are delicate

and must not be touched with metal objects such as screwdrivers. You may find it

easier to clean the assembly by pressing the PLAY button to bring head and pinch

roller into view. Be sure to press the CASS.STOP button after cleaning the mechanism.

Damage to the pinchwheel can occur if the unit is left in PLAY mode with the power

switched o ff.

Page 8