American Standard Townsquare 2555.400 Installationsanleitung Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Sanitärprodukt American Standard Townsquare 2555.400 herunter. American Standard Townsquare 2555.400 8 Seiten. Bidet fitting with everclean finish
Seite drucken
FINISH DRAIN INSTALLATION
Position BIDET fixture and secure to floor.
Insert lift rod into lift rod guide.
Position EXTENSION ROD (1) onto POP-UP ROD (2) and tighten
THUMBSCREW (3).
Remove one end of CLIP (4) from PIVOT ROD (7) by squeezing ends
together while sliding.
Insert PIVOT ROD (7) into second or third hole in EXTENSION ROD (1)
and reassemble CLIP (4). (EXTENSION ROD (1) may need to be bent.)
Adjust STOPPER height by repositioning EXTENSION ROD (1) on POP-UP
ROD (2) and tightening THUMBSCREW (3).
Using metal TAILPIECE (5), make connection to the TRAP (6).
INSTALL HANDLES
Turn VALVE to OFF position.
Figure A: Install STEM ADAPTERS (7) onto VALVE STEMS (8).
Figure B: With colored side up, place FRICTION RING (6) over
DECK ADAPTER (10). Loosely screw FRICTION NUT (5) onto
DECK ADAPTER (10). Do not tighten. Align flats on FRICTION
NUT (5) with RIBS (9) in HANDLE BASE (4).
Figure C: Screw HANDLE BASE (4) with FRICTION NUT (5)
onto DECK ADAPTER (10) until snug against mounting surface
and aligned properly.
Figure D: Install LEVER HANDLE (3) onto HANDLE ADAPTER (7)
and align. Check alignment, if not satisfactory remove and align.
Insert HANDLE SCREW (2) and tighten. Press in
INDEX BUTTON (1).
5
6
7
8
10
Figure A
1
2
3
4
Figure D
4
5
FLATS
Figure B
2
3
1
INSTALL DIVERTER KNOB
Diverter Knob; Push DIVERTER KNOB (11)
onto HANDLE ADAPTER (12). Push on RING (13)
and tighten with SCREW (14). Press on KNOB
CAP (15). (The screwdriver Gap for
disassembling should face downwards).
9
6
10
1
7
5
4
6
4
5
10
ALIGNED
Figure C
15
14
13
11
12