American Standard TU42050X Installationsanleitung Handbuch

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Sanitärprodukt American Standard TU42050X herunter. American Standard TU42050X 13 Seiten. Pressure balancing bath and shower trim kit

Seite drucken

Portsmouth

Pressure Balancing

Bath and Shower Trim Kit

Thank you for selecting American Standard...

the benchmark of fine quality for over 140 years.

To ensure that your installation proceeds smoothly-please

read these instructions carefully before you begin.

For use with shower heads rated at 4.9 L/min (1.3 gpm) or higher.

RECOMMENDED TOOLS

Plumbers' Putty

or Caulking

ROUGHING-IN DIMENSIONS

• To assure proper positioning in relation to wall.

Note roughing-in dimensions.

FINISHED WALL

3-3/4" REF.

(95 mm)

7-1/2" REF.

(191 mm)

74" FOR HEAD CLEARANCE

(188 cm)

18" OPTIONAL

(45,7 cm)

(130 mm) REF.

BOTTOM OF TUB

Product names listed herein are trademarks of AS America, Inc.

INSTALLATION

INSTRUCTIONS

Teflon Tape

Flat Blade Screwdriver

1-5/8" TO 3"

(41mm TO 76mm)

1/2" NPT

(12,7 mm) NPT

OPTIONAL TO

FINISHED FLOOR

7-1/4"

USUALLY BETWEEN

(184 mm)

65'' AND 78''

2-3/4" MAX. (69 mm)

1-3/4" MIN. (45 mm)

7-5/8" DIÁM.

(195 mm)

1-1/2" REF.

(38 mm) REF.

1/2" COPPER

5-1/8" REF.

4" (102 mm)

TOP OF TUB RIM

TU41550X

TU42050X

Phillips Screwdriver

1 1

CARTRIDGE INSTALLATION

• Remove PLASTER GUARD (6)

(Keep it installed for thin wall Installation).

• Remove BONNET NUT (1) by unthreading it

Counter clockwise. Remove test CAP (2).

• Remove PROTECTIVE HOUSING (3) from

CARTRIDGE (4). Install with "UP" text on top.

• Reinstall BONNET NUT (1) onto VALVE BODY (5)

and tighten firmly with 12 Nm or 9 lbs/ft.

6-3/8"

(163 mm)

NOTE: Specified tightening torque

of BONNET NUT (1) is critical to

assure sealing function.

- 1 -

O ff

TU41550X

Adjustable Wrench

O ff

TU42050X

Channel Locks

M965927 Rev. 1.1 (3/20)