air choice KPT-2001D Gebrauchsanweisung - Seite 4

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Heizgerät air choice KPT-2001D herunter. air choice KPT-2001D 7 Seiten. Ptc fan heater

CLEANING AND MAINTENANCE

1. Switch off the product, unplug it and wait unitl it cools down.

2. Clean the product with a dry towel or vacuum cleaner. Be sure not to wet

the heating element and the switches.

3. Always UNPLUG it when not in use. HOUSEHOLD USE ONLY!

Breakdown

No power or

do not work

Burning smell

Not hot

Inaccurate temp.

WARNING: Do not attempt to repair the heater. No user-serviceable parts inside.

Possible Causes and Solutions

1. Overheat protection

Unplug the heater and wait about 30 minutes to cool down, then plug

the product in again.

2. Tip-over protection

Move the heater to a firm, level surface.

3. Room reaches the desired temperature. Set Thermostat to 90°F or

turn off this function.

4. The power socket is no power.

Try another 120V power socket, whose receptacle should be at least

20A 125VAC.

5. Breaker/Fuse has been tripped.

Check the breaker of your electrical box - 20 amp circuit breaker. Do

not operate another high wattage product on the same circuit.

1. First use

It is normal for the heater to emit some odor when it is turned on for the

first time or after a long time not being used. The odor will disappear

once the heater has been running 30 minutes.

2. Check and ensure the surrounding. Remove any combustible items

within 0.9 meters (3 ft.). Use it in a well-ventilated area.

Ensure a MINIMUM CLEARANCE of 6 inches (15cm) from both sides

and rear of the heater.

The temp. sensor is at the back of the heater. There always is thermal

error. Same as A/C.