American Standard ChinaLux 1000 RF Einbauanleitung - Seite 2
Blättern Sie online oder laden Sie pdf Einbauanleitung für Inneneinrichtung American Standard ChinaLux 1000 RF herunter. American Standard ChinaLux 1000 RF 2 Seiten. Two-piece toilet
Seite drucken
11
TOILET CARE AND CLEANING
When cleaning your toilet, wash it with mild, soapy water, rinse thoroughly with clear water and dry with a soft cloth. Avoid detergents,
disinfectants, or cleaning products in aerosol cans. NEVER use abrasive scouring powders or abrasive pads on your toilet seat. Some bathroom
chemicals and cosmetics may damage the seat's finish.
!
WARNING: Do not use in-tank cleaners. Products containing chlorine (calcium hypochlorite) can seriously damage fittings in the tank. This
damage can cause leakage and property damage. ChinaLux
the use of cleaners containing chlorine (calcium hypochlorite).
TOILET SEAT CARE AND CLEANING
When cleaning your toilet seat wash it with mild, soapy water: rinse the seat thoroughly with clear water: and dry with a soft cloth.
Avoid detergents, disinfectants, or cleaning products in aerosol cans. NEVER use abrasive scouring powders on your seat. Some bathroom
chemicals and cosmetics may damage the seat's finish. After installation, check the tightness of the bolts from time to time to ensure a tight fit.
NOTE: "XXX" represents color or trim finish options. Specify when ordering.
PART NO.
120000.XXX
7381044-0070A
738916-102.0070A
7301310-XXX0A
PROBLEM
POSSIBLE CAUSE
Does not flush
a. Water supply valve closed.
b. Supply line blocked.
c. Flush valve chain too loose or disconnected.
d. Stuck float/float rod.
e. Water control flow rate too restricted.
Poor or
a. Tank water level too low.
sluggish flush
b. Bowl water level too low.
c. Supply valve partly closed.
d. Flush valve closes early due to high
supply pressure.
e. Partially clogged trapway and/or
drain pipe and/or vent.
f. Supply pressure too low.
Toilet leaks
a. Poor supply line connection.
b. Poor bowl to tank/floor connection.
Toilet does
a. Tank water level too high.
not shut off
b. Float rod or float ball depressed by
tank cover.
c. Flush valve chain too tight, holding
flush valve open.
d. Float rod interfering with flush valve closing.
e. Flush valve seat and/or flapper worn
or deformed.
f. Sand or debris lodged in water control.
Noisy Flush
a. Water control flow rate too restricted
If inspection of this ChinaLux™ plumbing product, within one year after its initial installation, confirms that it is defective in materials or workmanship, ChinaLux will
repair or, at its option, exchange the product for a similar model.
This warranty does not apply to local building code compliance. Since local building codes vary considerably, the purchaser of this product should check with a
local building or plumbing contractor to insure local code compliance before installation.
This warranty shall be void if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance, abuse, misuse,
accident or other damage; if it was not installed in accordance with ChinaLux's instructions; or if it has been modified in a manner inconsistent with the product as
shipped by ChinaLux.
ChinaLux's option to repair or exchange the product under this warranty does not cover any labor or other costs of removal or installation, nor shall ChinaLux be
responsible for any other incidental or consequential damages attributable to a product defect or to the repair or exchange of a defective product, all of
which are expressly excluded from this warranty. (Some states or provinces do not allow the exclusion or limitation of implied warranties, so this exclusion may
not apply to you.)
This warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or from province to province, in which case this
warranty does not affect such statutory rights.
For service under this warranty, it is suggested that a claim be made through the contractor or dealer from or through whom the product was purchased, or that a
service request (including a description of the product model and of the defect) be sent to the following address:
Piscataway, New Jersey 08855
Attention: Director of Consumer Affairs
DESCRIPTION
Chinaware cover
Fill Valve
Refill Tube
Tank Coupling Kit
TROUBLESHOOTING GUIDE
.
CHINALUX ONE-YEAR LIMITED WARRANTY
AS America Inc.
P.O. Box 6820,
™
shall not be responsible or liable for any tank fitting damage caused
PART NO.
7381045-400.0070A
7381055-100.0070A
7381046-XXX0A
034783-XXX0A
CORRECTIVE ACTION
a. Open valve and allow water to fill tank.
b. Shut off water supply, disconnect supply line, and inspect
all gaskets and washers. Reassemble.
c. Readjust chain length as required.
d. Adjust to allow free downward movement of float arm.
e. Follow instructions to increase water control flow rate.
a. Follow instructions to adjust water level.
b. Check that refill tube is connected to water control and
inserted into tank overflow without being kinked or damaged.
c. Open supply valve fully. Be sure that proper supply tube size is used.
d. Follow instructions to reduce water control flow rate.
e. Remove obstruction. Consult a plumber if necessary.
f. Normal supply pressure must be at least 20 psi.
a. Review Step 9 of installation procedure.
b. Review Step 4 through 7 of installation procedure.
a. Follow instructions to adjust water level.
b. Readjust float rod.
c. Readjust chain length as needed.
d. Follow installation instructions to reduce water control flow rate, which
will lift lowest position of float rod without affecting water level.
e. Replace flapper/flush valve assembly, as needed.
f. Shut off water supply. Consult a plumber, if necessary.
a. Follow instructions to increase water control flow rate.
For residents of the United States, warranty information may also be
obtained by calling the following toll free number: (800) 442-1902
by
DESCRIPTION
Flush Valve
Flapper Assembly
Trip Lever
Bolt Cap Kit
7301311-100 Rev.A