DOMUS LINE TOUCH TW Installationshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Installationshandbuch für Schalter DOMUS LINE TOUCH TW herunter. DOMUS LINE TOUCH TW 8 Seiten.

INSTALLATION MANUAL

TECHNICAL SPECIFICATIONS

Input voltage: 24Vdc

Maximum applicable load: 60W

WARNINGS

Safety is guaranteed if these instructions are followed so they must be kept.

Installation may require involving qualified personnel. Before installing the

device ensure that the environmental conditions are in compliance with

and suitable for product characteristics. Before any operation on the device

disconnect mains power.

Touch TW (fig. 1) can be secured to the surface using the screws (A) and

cover plugs (B) included in the package.

Then connect TOUCH TW to a safe power supply with 24Vdc stabilised

voltage (sold separately) and with power at least 10% higher than the total

load, inserting the male power cable connector (D) into one of the

distributor sockets (E) and connecting the devices (F) to be controlled (only

devices with TW LED) to the output cable (G) in accordance with the

diagram shown in Figure 2.

If more than one device must be connected to the power supply unit ensure

that the total sum of the power absorbed by the devices (check the plate data

shown on the product label) does not exceed the maximum power permitted

both by the dynamic adjustment system and by the Converter.

DOMUS Line guarantees the product only if powered with Converters and

dynamic light adjustment systems supplied by us.

Switching on and off is carried out simply by briefly touching the indicator

LED (C). By long-pressing you can change the colour shade of the connected

device (tunable function). The selected colour will be stored until the next

adjustment (Colour Memory).

IMPORTANT:

This article must be connected directly to the electronic power supply and

must never be connected downline of other electronic switches. The

sensor must not be installed near electromagnetic or heat sources and not

installed in contact with metal surfaces.

The warranty on the device is valid only if powered by a power supply

provided by DOMUS Line. The warranty's general terms and conditions for

this device are available at www.domusline.com