Domus Ventilation DX12 Handbuch für Installation und Wartung - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Installation und Wartung für Fan Domus Ventilation DX12 herunter. Domus Ventilation DX12 7 Seiten. Fan module 50hz/60hz

Seite drucken
Installation and Maintenance
DX Fan Module 50Hz/60Hz
4.0 Electrical Installation
4.0 Electrical Installation
Electrical work should be undertaken by a qualified electrician in
Electrical work should be undertaken by a qualified electrician in
accordance with the wiring regulations.
accordance with the wiring regulations.
1
1
Release the electrical panel from the fan plate.
Release the electrical panel from the fan plate.
3
3
Clamp the cable and complete the connections.
Clamp the cable and complete the connections.
4.1 Wiring
4.1 Wiring
4.1.1 Fan Operated By On / Off Switch
4.1.1 Fan Operated By On / Off Switch
Double pole
Double pole
Fuse
isolator
isolator
max. 3 amp
L
L
N
N
Connect link wire between L2 & L4 for extract OR
Connect link wire between L2 & L4 for extract OR
connect link wire between L2 & L3 for supply.
connect link wire between L2 & L3 for supply.
4.1.2 Fan Operated By Integral Sensor
4.1.2 Fan Operated By Integral Sensor
SL
(Swit ched Live)
(Swit ched Live)
Double pole
Double pole
Fuse
isolator
isolator
max. 3 amp
L
L
N
N
Connect link wire between L2 & L4 for extract OR
Connect link wire between L2 & L4 for extract OR
connect link wire between L2 & L3 for supply.
connect link wire between L2 & L3 for supply.
Connect switched live signal to L5 for integral timer module.
Connect switched live signal to L5 for integral timer module.
LAB1346R May 2018
or
Fuse
max. 3 amp
DX Fan unit
L5
SL
L4
or
L3
Fuse
L2
max. 3 amp
L1
N
DX Fan unit with
integral sensor
2
2
Remove the terminal cover.
Remove the terminal cover.
4
4
Refit terminal cover before replacing the electrical panel.
Refit terminal cover before replacing the electrical panel.
4.1.3 Basic Fan Operated By Remote Sensor
4.1.3 Basic Fan Operated By Remote Sensor
L5
L5
L4
L4
or
Double
Fuse
L3
L3
pole
max.
L2
L2
isolator
3 amp
L1
L1
N
N
XS Fan unit
Connect link wire between L2 & L4 for extract OR
Connect link wire between L2 & L4 for extract OR
connect link wire between L2 & L3 for supply.
connect link wire between L2 & L3 for supply.
IMPORTANT
L5
Isolation - Before commencing work, make sure that the unit is
Isolation - Before commencing work, make sure that the unit is
L4
or
electrically isolated from the mains supply.
L3
L2
L1
N
IMPORTANT
XS Fan unit with
There will be a short delay on startup and shutdown of approximately
There will be a short delay on startup and shutdown of approximately
integral sensor
V E N T I L A T I O N
Remote Sensor
Remote Sensor
L1
L2
N
L1
L2
N
or
Double
Fuse
pole
max.
isolator
3 amp
IMPORTANT
electrically isolated from the mains supply.
IMPORTANT
(Shutter Operation XS fans)
(Shutter Operation XS fans)
40 seconds. This is normal.
40 seconds. This is normal.
L5
L5
L4
L4
or
L3
L3
L2
L2
L1
L1
N
N
XS Fan unit
DX Fan unit
Page 2