American Standard Cadet Elite Corner Whirlpool 2775EC Spezifikationsblatt
Blättern Sie online oder laden Sie pdf Spezifikationsblatt für Badewannen American Standard Cadet Elite Corner Whirlpool 2775EC herunter. American Standard Cadet Elite Corner Whirlpool 2775EC 2 Seiten. Corner whirlpools by american standard high gloss acrylic
Seite druckenCADET ELITE™ CORNER WHIRLPOOL
Comfortable two person design with dual back
support positions, molded-in armrests and
generous faucet deck area.
2775E (specify White 020, Bone 021, or
Linen 222)
• Acrylic with fiberglass reinforcement
• 2.0 HP self-draining pump/motor
with dry run seal
• Eight multi-directional and flow adjustable
jets including:
Two high performance Ideal-flow™ Jets
Six interchangeable Flex-jets™
• Two silent air volume controls
• Deck-mounted On/Off control
• Complete factory installed and tested
whirlpool system
2775EC (specify White 020, Bone 021, or
Linen 222)
• Same as above with the StayClean™
whirlpool system featuring Antimicrobial
AlphaSan®
Nominal Dimensions: 60" x 60" x 19-3/4"
(1524 x 1524 x 502mm)
Installed Size: 85" x 60" x 19-3/4"
(2159 x 1524 x 502mm)
Components Needed:
Bath Filler*: (specify finish)
Bath Drain: BATH-DRAIN
(specify Chrome 002, Polished Brass 099,
or Satin 295)
Custom Accessories Available:
Pulse Jet Kit: PULSE-JET (two per kit,
specify White 020, Bone 021, or Linen 222)
Soft Jet Kit: SOFT-JET (two per kit, specify
White 020, Bone 021, or Linen 222)
E-Z-Install™ Whirlpool Heater - EZHEAT-100
Tile Bead Kit: TILE-BEAD
* See American Standard Faucet Selector
Revised 6/03
WHIRLPOOLS BY AMERICAN STANDARD
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
NOTE: Roughing-in dimensions and product specifica-
tions shown on reverse side of page.
NOTE: E-Z-Install™ Whirlpool Heater is designed to
maintain water temperature during operation. It will not
heat cold water to desired bathing temperature.
SPS 2775E
© 2003 American Standard Inc.
CADET ELITE™ CORNER
HIGH GLOSS ACRYLIC
HD-003