American Standard DXV LYNDON D12536-014 Installationsanleitung Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Badewannen American Standard DXV LYNDON D12536-014 herunter. American Standard DXV LYNDON D12536-014 8 Seiten. 5-1/2' x 30", 5-1/2' x 33"

Seite drucken

INSTALLATION INSTRUCTIONS:

Place the tub on a nished, level oor in the

desired location.

Using an erasable pencil or marker, trace the outline of

the base of the tub on the oor. (See Fig. 1)

Using the adjustable feet on the underside of the tub, ensure

that the tub is level.

Ensure that there is a gap between the tub base and the oor.

Gap shall not exceed 1/8" [3 mm]. (See Fig. 2)

REMOVE THE TUB

Using the traced outline for reference, con rm that the

drain/waste outlet in the oor will align with the tub drain outlet.

(Tub drain outlet will be located in the center of the traced

outline. See Fig. 3)

Note: The drain/waste outlet must be installed in

accordance with all local building codes.

All drain connections must be made using an

access created beneath the tub.

INSTALLING THE 1-1/2" DIAMETER TAIL PIECE ASSEMBLY INTO P-TRAP

The tail piece assembly, consisting of a anged tail piece, drain tail piece

gasket and slip-joint nut used to connect the the tub drain to the drain/waste

outlet, is included with this product.

The 1-1/2" diameter tail piece is compatible with drain provided. (See Fig. 4)

Slide the slip-joint nut over tail piece towards the anged end as shown.

Slide the P-trap slip-joint nut and seal over the tail piece as shown.

Insert the tail piece into the P-trap.

The ange of the tail piece should be approximately 5-3/4" [145 mm] or

4-7/8" [124 mm] depending on model, above the finished floor when fully

inserted into the P-trap.

The tail piece can be cut if necessary.

1/8" MAX

(3mm)

FINISHED FLOOR

DRAIN

TAIL PIECE

ASSEMBLY

(INCLUDED)

For MODEL#

D12536-004

5-3/4" [145 mm]

For MODEL#

D12536-014

4-7/8" [124 mm]

FINISHED

FLOOR

P-TRAP

SLIP-JOINT NUT

& SEAL

(PROVIDED BY

INSTALLER)

- 6 -

FIG. 1

FIG. 2

FLOOR CUTOUT

TRACED

FIG. 3

OUTLINE

THREADED PORTION

OF DRAIN BODY

DRAIN TAIL PIECE GASKET

SLIP-JOINT NUT

TAIL PIECE

(PROVIDED BY

INSTALLER)

FIG. 4

754988-100 REV. B (5/15)

P-TRAP