d2itsu APD-12CR Benutzerhandbuch - Seite 17

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Klimagerät d2itsu APD-12CR herunter. d2itsu APD-12CR 20 Seiten.

Seite drucken

Fig. 16a

Exhaust hose installation:

The exhaust hose and adaptor must be installed

or removed in accordance with the usage mode.

COOL,HEAT(heat pump type) or

Fig. 16b

AUTO mode

FAN,DEHUMIDIIFY or

HEAT(electrical heat type) mode

1. Install the adaptor B and adaptor I onto the

exhaust hose as shown in Fig.16a or Fig.16b.

Refer to the previous pages for window kit

installation.

2. Resert the hook of the Exhaust hose into the

hole seat of the air outlet and slide down the

Exhaust hose along the arrow direction (See

Fig. 17

Fig.17) for installation.

The exhaust hose can be installed into the

wall

(Not applicable to the units without adaptor

A, expansion plugs and wooden screws of

Accessories ).

1. Prepare a hole in the wall. Install the wall

Exhaust adaptor A onto the wall(outside) by

using 4 expansion plugs and wooden screws,

be sure to fix thoroughly. (See Fig.18)

2. Attach the Exhaust hose to wall Exhaust

adaptor A.

Note:

Cover the hole using the adaptor cap when

Fig. 18

not in use.

- The exhaust hose can be compressed

or extended moderately according to the

installation requirement, but it is desirable to

keep the hose length to a minimum.

IMPORTANT:

DO NOT OVER BEND THE EXHAUST HOSE

(SEE Fig.19)

CAUTION

Make sure that there is no obstacle around the

Fig. 19

air outlet of the exhaust hose (in the range of

500mm) in order to the exhaust system works

properly.

INSTALLATION INSTRUCTIONS

Install

Remove