DA DA1280 Handbuch - Seite 12
Blättern Sie online oder laden Sie pdf Handbuch für Schnurloses Telefon DA DA1280 herunter. DA DA1280 16 Seiten. Cordless telephone plug
Seite druckenFAQ: Questions and Answers
Please consult also the website of your dealer and/or manufacturer to
get updated information and FAQs about DA1280.
problem
no line, no signalling,
no dialling possible
No DECT Link to BASE.
DECT Registration
does not work
You can hear Dial
signalling tone, but
dialling is not
executed.
root cause
The analoge terminal is not properly
connected to DA1280
current line is occupied by further
devices
DA1280 is not (properly) registrated
to DECT BASE.
LED2 (DECT Link is red
DECT Base is switched OFF
DECT Base is not in Registration
Mode.
PIN code is wrong
Transparent Mode is ON .
remedy
Crosscheck cable and connectors
between DA1280 and connected
wait till line is free.
Execute Registration and take
care about proper PIN of Base
Reduce the position of DA1280
to Base till LED2 = GRÜN
Switch-ON DECT Base and wait
several seconds
Activate Registration Mode of
DECT Base .
Use
Registration
Configuration
**801*{PIN}# or change OIN of
Base into -PIN auf „0000" and
repeat Registration
switch >OFF Transparent Mode
via Configuration Code
**805*0#
via
Codes
-12-