Da-Lite IMAGER Gebrauchsanweisung - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Projektionsfläche Da-Lite IMAGER herunter. Da-Lite IMAGER 6 Seiten.

METHOD 3 (SCREENS OVER 96" IN VIEWING

WIDTH)

1. Secure the large wall brackets to wall studs at

the desired height. Make sure the brackets are

level. The top of the frame will be 1/8" above the

top of the large wall bracket when mounted.

You will need at least 5/8" clearance above the

bracket to hang the screen. Figures 6 and 7

show the proper orientation for the supplied

wall brackets.

FIGURE 7

2. To install the lower large wall bracket, you must

measure the overall height of the screen frame

and subtract 1/4". This is the dimension from the

top of the upper large wall bracket to the

bottom of the lower large wall bracket. See

Figure 6.

3. Position the screen with the attached surface

onto the top large wall bracket as shown in

Figure 6. Push down at the center of the bottom

frame rail to hook onto the lower large wall

bracket.

LARGE WALL

BRACKETS

3-PIECES

CLEANING

Da-Tex

, Dual Vision, Pearlescent, Cinema Vision,

Da-Mat

, High Contrast Da-Mat

High Contrast Audio Vision, High Contrast Cinema Vision

and High Contrast Cinema Perf surfaces can be

cleaned as follows:

Using a white clean cloth (100% cotton preferred)

that is dampened with clear water, gently wipe the

area in one direction. Do not use a circular motion.

Using a dry 100% cotton cloth, wipe dry after each

cleaning session. To clean a stubborn stain or a

sticky surface, use denatured alcohol (methanol or

methyl alcohol) following the same procedure as for

water.

, Audio Vision,