Da-Lite Picture King Montageanleitung Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Projektionsfläche Da-Lite Picture King herunter. Da-Lite Picture King 16 Seiten.
Auch für Da-Lite Picture King: Gebrauchsanweisung (4 seiten)

Da-Lite Picture King Montageanleitung Handbuch
FOLDING THE PICTURE SURFACE FOR PACKING
When folding the screen material for packing, observe the
following precautions before proceeding:
1. The surface should not be allowed to contact
painted, varnished or plastic finished objects for a
prolonged period of time.
2. Make certain the picture surface is on a clean,
flat surface.
Then proceed in the following manner:
Place clean white tissue paper – with no printing – on top
of the picture surface. If tissue is not available, a soft white
cloth or something similar will serve the same purpose.
Under no conditions should newspaper or anything similar
be used since these may damage the screen material.
1. With the viewing side facing up, fold the fabric in
half from top to bottom. Make certain when folding,
the surface does not come in contact with either the
black binding, grommets or snap buttons.
2. If the material on the first fold is more than 3 feet
high, then fold once again, but always place clean
tissue paper between the folds.
3. For large size screens, fold in half again if necessary.
Make certain when folding, the surface does not
come in contact with either the black binding,
grommets or snap buttons.
HANDSOME THEATRE-LIKE SET CREATED
WITH FAST-FOLD
For a finished, professional appearance, Fast-Fold screens
can be dramatically enhanced with the Drapery
Presentation Accessory Kit. Handsome velour drapes in a
choice of two eye-catching colors surround the screen on
four sides, providing an attractive stage front to the
audience.
The Presentation Drapery Accessory Kit serves a second
function when used with a rear projection surface. It
shields extraneous light from the projector as well as
hiding projection and other equipment from the audience.
PRESENTATION DRAPERY ACCESSORIES
®
4. After the top to bottom folding procedure is
completed, then fold from left to right and continue
folding until the fabric is of sufficient size to fit into
the leatherette case.
NOTE: Keep the screen surface in the envelope provided
when it is not in use. Failure to observe these normal
precautions may cause discoloration of the material.
CLEANING
Da-Tex, Dual Vision, and Da-Mat surfaces can be cleaned as
follows:
Using a white clean cloth (100% cotton preferred) that is
dampened with clear water, gently wipe the area in one
direction. Do not use a circular motion. Using a dry 100%
cotton cloth, wipe dry after each cleaning session. To
clean a stubborn stain or a sticky surface, use denatured
alcohol (methanol or methyl alcohol) following the same
procedure as for water. For extremely stubborn stains, use
V M & P, Naphtha or Super Naphtha and follow the same
procedure as for water.
Cinema Vision and Pearlescent surfaces are not cleanable.
NOTE: Fast-Fold screens are shipped with tissue paper
packed between the folds. This keeps the material from
sticking to itself and makes it easier to unfold.
An optional Adjustable Skirt Bar provides a versatile
method of changing the picture ratio.
The hardware in the kit is made of lightweight aluminum
and, along with the folded velour drapes, is packed into a
convenient easy to carry poly case. The entire kit can be
set up in minutes. Case optional at additional cost.
Presentation Drapery Accessory Kit
Consists of a set of velour drapes in choice of Blue or
Black, Valance, two Wings, Skirt, Valance Bar, and two
Wing Bars.
• All bars attach to screen frame with slip on clamps.
No tools needed.
• Valance Bar attaches to frame first. Wing Bars then
attach to Valance Bar.
• Valance Bar extends 12" above frame. Wing Bars
extend 32" on each side.
• Wing Bars attach to frame when ceiling height
prevents use of Valance.
• 45" High Skirt snaps to bottom of screen or to optional
Adjustable Skirt Bar.
3
(ILLUSTRATED)
Form 47400 Rev. 4/01