Da-Lite PROFESSIONAL ELECTROL Gebrauchsanweisung - Seite 4
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Projektionsfläche Da-Lite PROFESSIONAL ELECTROL herunter. Da-Lite PROFESSIONAL ELECTROL 8 Seiten.
Auch für Da-Lite PROFESSIONAL ELECTROL: Gebrauchsanweisung (8 seiten), Gebrauchsanweisung (12 seiten)
Seite drucken
PROFESSIONAL ELECTROL INSTALLATION
SCREENS UP TO 18' WIDE
Length = Fabric Width
+10", All Sizes
Reinforced
Top
Motor End
Electrical
Outlet Box
5"
CEILING TYPE HANGER
PICTURE
SURFACE
WALL TYPE HANGER
PICTURE
SURFACE
WALL OR CEILING MOUNT
WITH HANGERS
Wall type hangers and ceiling type
hangers are standard equipment. One
set is supplied with each screen. Useful
for recessed installations.
9-1/2"
11-5/16"
5"
Motor In The Roller
Screen Without Doors
SUGGESTED METHODS OF INSTALLATION
CEILING MOUNT
WITHOUT HANGERS
Screen case is placed flush with
the wall and ceiling and held in
position by moulding securely
attached to the wall.
SCREENS 20' AND WIDER
Reinforced
Top
Motor End
Electrical
Outlet Box
2" MOULDING
PICTURE
SURFACE
1" x 3" CLEAT
FOR EXPOSED INSTALLATION
If the screen is to be mounted in an exposed
position, it may be covered with finished ply-
wood, veneer, paneling, plastic wall covering or
a valance.
3
Length = Fabric Width
+10", All Sizes
Motor In The Roller
Screen Without Doors
5"
RECESSED ABOVE CEILING
Other methods of installation
will suggest themselves in new
buildings where it would be an
easy matter to provide a recess
for the screen to conceal it when
not in use.
Do not seal in—allow access.
10-3/4"
12-9/16"
5"
RAFTERS
PICTURE
SURFACE