eKey home KNX RS-485 Betriebsanleitung - Seite 17

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Medienkonverter eKey home KNX RS-485 herunter. eKey home KNX RS-485 20 Seiten.

Seite drucken
16│en
Configuring KNX
ekey events 1-10 are assigned to a finger and a finger scanner via the
SAVE USER
process (see ekey multi CP DRM operating instructions,
section
SAVING
USERS). In the storing process, the ekey event is
assigned after selecting the user, key, and finger.
In an ekey multi system, different ekey events can be triggered on the
various finger scanners with one user finger.
See ekey home CP DRM operating instructions, section "Saving users".
Select
SAVE USER
in the menu. Carry out all steps up to
SELECTION.
Step
Action
1.
/
2.
3.
/
4.
5.
No action
required
NOTICE
Description
Press
or
to select the
Λ
V
desired finger
Press OK.
Press
or
to select the
Λ
V
desired DEVICE.
Press
OK
to select the
desired ekey event 1.
Repeat steps 3 and 4 in
order to assign the ekey
event to be triggered for
the next finger scanner. If
it is left EMPTY,
identification on the
respective finger scanner
will not trigger an ekey
event
FINGER
Display
Max
S1
le middle finger
le index finger
le thumb
ri thumb finger
ri index finger
ri middle finger
KNX ri index finger
OK
DEV1: empty
DEV2: empty
DEV3: empty
DEV4: empty
KNX ri index finger
OK
DEV1: empty
DEV2: empty
DEV3: empty
DEV4: empty
KNX ri index finger
OK
DEV1: HOME SCENARIO
DEV2: empty
DEV3: empty
DEV4: empty
KNX ri index finger
OK
DEV1: HOME SCENARIO
DEV2: HOME SCENARIO
DEV3: EXIT
DEV4: empty