American Standard Cadenza Elite 6060E Merkmale und Abmessungen
Blättern Sie online oder laden Sie pdf Merkmale und Abmessungen für Whirlpool American Standard Cadenza Elite 6060E herunter. American Standard Cadenza Elite 6060E 2 Seiten. Corner whirlpool
Auch für American Standard Cadenza Elite 6060E: Teileliste (1 seiten)
Seite drucken
CADENZA ELITE™ CORNER WHIRLPOOL
Comfortable two person design with dual back
support positions, integral seat and installed
grab bar. Includes factory installed E-Z-
Install™ Whirlpool Heater .
6060E (specify White 020, Bone 021, or
Linen 222)
• Acrylic with fiberglass reinforcement
• 2.0 HP self-draining pump/motor
with dry run seal
• Ten multi-directional and flow adjustable jets
including:
Two high performance Ideal-flow™ Jets
Eight interchangeable Flex-jets™
• Three silent air volume controls
• Deck-mounted On/Off control
• Complete factory installed and tested
whirlpool system
6060EC (specify White 020, Bone 021, or
Linen 222)
• Same as above with the StayClean™
whirlpool system featuring Antimicrobial
AlphaSan®
Nominal Dimensions:
54-1/2" x 54-1/2" x 21-1/2"
(1384 x 1384 x 546mm)
Installed Size: 76-3/4" x 65-3/8" x 21-1/2"
(1949x 1661 x 546mm)
Components Needed:
Bath Filler*: (specify finish)
Bath Drain: BATH-DRAIN
(specify Chrome 002, Polished Brass 099,
or Satin 295)
Custom Accessories Available:
Pulse Jet Kit: PULSE-JET (two per kit, specify
White 020, Bone 021, or Linen 222)
Soft Jet Kit: SOFT-JET (two per kit, specify
White 020, Bone 021, or Linen 222)
Corner Apron: CORNER-APRON (specify
White 020, Bone 021, or Linen 222)
Tile Bead Kit: TILE-BEAD
* See American Standard Faucet Selector
Revised 10/03
CADENZA ELITE™ CORNER
WHIRLPOOLS BY AMERICAN STANDARD
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
NOTE: Roughing-in dimensions and product
specifications shown on reverse side of page.
NOTE: E-Z-Install™ Whirlpool Heater is designed to
maintain water temperature during operation. It will not
heat cold water to desired bathing temperature.
SPS 6060E
© 2003 American Standard Inc.
HIGH GLOSS ACRYLIC
HD-001