American Standard CADET 2773.002 Merkmale und Abmessungen - Seite 2

Blättern Sie online oder laden Sie pdf Merkmale und Abmessungen für Whirlpool American Standard CADET 2773.002 herunter. American Standard CADET 2773.002 2 Seiten. 6’ x 36” whirlpool & bathing pool

Seite drucken
305 mm
(12)
229mm
(9)
19 mm
(3/4)
FINISHED
WALL
SEE FITTING
SPECS FOR
DIMENSIONS
229 mm
(9)
908 mm
(35-3/4)
CUTOUT IN FLOOR
454 mm
FOR DRAIN
(17-7/8)
C/L OF
57mm
SUPPLIES
(2-1/4)
C/L OF DRAIN
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
1651 & 1981mm
(65 & 78)
C/L OF
OVERFLOW
38 mm
(1-1/2)
70mm
(2-3/4)
502 mm
(19-3/4)
ROUGH
FLOOR
INTEGRAL
SUPPORT
FEET
1-1/2 O.D.TAILPIECE
GENERAL SPECIFICATIONS FOR 2773 WHIRLPOOL
INSTALLED SIZE
72 x 35-3/4 x 19-3/4 In.(1829 x 908 x 502mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
MIN. OPERATING GAL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA
TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT
REQUIRED. ENCLOSING MATERIAL BY OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL
INFORMATION.
OPTIONAL 3 WALL TILING BEAD. KIT AND APRON No. 9272.018 or 9372.018 AVAILABLE AND MUST BE
ORDERED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI
Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided leaflet.
PROVIDE ACCESS TO PUMP FOR
SERVICING ON ALL INSTALLATIONS
1829 mm
(72)
RECOMMENDED FITTING LOCATION
64 X 330mm (2-1/2 x 13")
FOR PIER OR ISLAND
INSTALLATIONS ONLY
PUMP
(2) AIR VALVES
OUTLINE OF CUTOUT
(8) JETS
1791 mm x 870 mm
ALT. FITTING
(70-1/2 X 34-1/4)
LOCATION #1
C/L OF
SHOWER ARM
C/L OF
VALVES
SAFE-T-HEATER
REMOVABLE
BLANK
C/L OF
305mm
SPOUT
(12)
LEVELING STRINGER
102 mm
NOT FOR SUPPORT
(4)
464 mm
(18-1/4)
1-1/2 N.P.T.M.
THREADS
70 mm
(2-3/4)
117 mm
(4-5/8)
101 Lbs. (45 Kg.)
751 Lbs. (341 Kg)
78 Gal. (296 L.)
64 Gal. (243 L.)
23 x 49 In. (584 mm x 1245 mm)
65 x 29 In. (1651 x 737 mm)
13-1/2 In. (343 mm)
40 Lbs./Sq. Ft. (190 Kgs/Sq. m.)
2.1 HP, 14.4 AMPS, 120V.
© 2003 American Standard Inc.
WHIRLPOOL & BATHING POOL
229mm
(9)
19 mm
(3/4)
FINISHED
WALL
SEE FITTING
SPECS FOR
DIMENSIONS
ON/OFF
SWITCH
908 mm
(35-3/4)
454 mm
(17-7/8)
C/L OF
SUPPLIES
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
1651 & 1981mm
(65 & 78)
C/L OF
OVERFLOW
ROUGH
FLOOR
GENERAL SPECIFICATIONS FOR 2773 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
23.8
PTS.
48.3
CUBE (FT 3 )
CADET™ 6' X 36"
HIGH GLOSS ACRYLIC
1829 mm
(72)
305 mm
RECOMMENDED FITTING LOCATION
(12)
64 X 330mm (2-1/2 x 13")
FOR PIER OR ISLAND
INSTALLATIONS ONLY
229 mm
(9)
CUTOUT IN FLOOR
FOR DRAIN
57mm
(2-1/4)
ALT. FITTING
LOCATION
C/L OF DRAIN
C/L OF
SHOWER ARM
305 mm
38 mm
(12)
(1-1/2)
102 mm
70 mm
LEVELING STRINGER
(4)
(2-3/4)
NOT FOR SUPPORT
502 mm
(19-3/4)
INTEGRAL
1-1/2 N.P.T.M.
SUPPORT
THREADS
FEET
1-1/2 O.D.TAILPIECE
72 x 35-3/4 x 19-3/4 In.
(1829mm x 908 mm x 502mm)
76 Lbs. (34 Kg.)
725 Lbs. (326 Kg.)
23 x 49 In. (584 mm x 1245 mm)
65 x 29 In. (1651 x 737 mm)
13-1/2 In. (343 mm)
38 Lbs./Sq. Ft. (183 Kgs/Sq. m.)
OUTLINE OF CUTO
1791 mm x 870 mm
(70-1/2 X 34-1/4)
C/L OF
VALVES
C/L OF
SPOUT
464 mm
(18-1/4)
70 mm
(2-3/4)
117 mm
(4-5/8)
78 Gal. (296 L.)
23.8
48.3