American Standard ELLISSE OVAL 2709 Einbauanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Einbauanleitung für Whirlpool American Standard ELLISSE OVAL 2709 herunter. American Standard ELLISSE OVAL 2709 4 Seiten. Whirlpool / bathing pool

WI RE SE LECTI ON G UID E
M ax im um d ist ance f r om
Motor
T he siz es sh own o n th i s
fu se box t o m o t or
Hi-Performance
ch ar t ar e r e co mme nda ti on s
Rating
50'
100'
150'
200'
fo r copp er condu ct ors
onl y. A lways fol low
120V P ow e r L i ne
lo cal and n at ion a l
ele ctrical code s
2.1
12
10
8
8
DRAIN CONNECTION AND SYSTEM TEST
Using recommended drain opening, connect whirlpool drain to waste line. Tighten all drain joints securely. Check the pump
couplings and make sure they are hand-tight. Clean the whirlpool and fill with water to a point 2" above the top of the
highest jet. Recheck the pump couplings and make certain that they are not leaking. (Although the pump couplings are
factory tightened and inspected, some loosening may have occurred during transit.) Make sure the whirlpool is connected
to the electrical supply and turn the whirlpool on. Check for leaks around all piping connections while the whirlpool is
running.
POST INSTALLATION CLEAN-UP
Remove all construction debris from bath. Tile grout can be removed with a wooden popsicle stick or tongue depressor.
Do not use wire brushes or any other metal implement on bath surface.
Post installation clean-up generally can be completed using warm water and liquid dishwashing detergent. Stubborn dirt or
stains may be removed using granular Spic and Span ® mixed with water.
Painter's naphtha can be used to remove excess adhesives and/or wet oil-base paint.
HARSH CHEMICALS SHOULD NEVER BE USED ON ACRYLIC SURFACES.
Abrasive cleaners must not be used since they will scratch and dull the surface. Dulled areas can be restored by rubbing
with a white automotive-type polishing compound and waxing with a liquid wax.
SPIC AND SPAN ® IS A REGISTERED TRADEMARK OF PROCTER & GAMBLE
(4)
751753-100 Rev. L