DAB ACTIVE JC 92 Anleitung für Installation und Wartung - Seite 7
Blättern Sie online oder laden Sie pdf Anleitung für Installation und Wartung für Water Pump DAB ACTIVE JC 92 herunter. DAB ACTIVE JC 92 20 Seiten.
Seite drucken
4.2 Control panel functions
There is the possibility of remote signalling of the alarm signal; in fact, on the electronic card, Active
has two male faston outlets ( 4.7 mm ) to allow the connection.
(see fig. 14 on page 27)
Contact characteristics: 24V - 5A – normally open (N.O.)
4.3 Regulating the Start pressure.
To regulate the Start pressure, unscrew the protective cap and turn the green trimmer knob. The pressure may
be set at a minimum of 1.5 bar or a maximum of 2.5 bar. (Fig.2)
START PRESSURE REGULATION
FROM 1.5 TO 2.5 bar
ENGLISH
GREEN WARNING LIGHT ON
− System live or correct operation.
GREEN WARNING LIGHT ON
RED WARNING LIGHT BLINKING
− No water: the pump will perform a series of
− Overheating of the motor.
− Blockage of the pump / motor.
GREEN WARNING LIGHT ON
RED WARNING LIGHT ON
− Protection against excess temperature of hydraulic
Fig. 2
21
automatic restarts.
parts .