Ekit JT Hotspot Kennenlernen Ihrer - Seite 7

Blättern Sie online oder laden Sie pdf Kennenlernen Ihrer für Drahtloser Router Ekit JT Hotspot herunter. Ekit JT Hotspot 10 Seiten.

Troubleshooting

Can't set up the USB connection between your device and PC

• Make sure you've installed the software. Run the installation program

at My Computer > ZTEMODEM.

• You might need to uninstall the software, then reinstall it using the

instructions above.

Can't set up the Wi-Fi connection with your JT Hotspot

• Make sure Wi-Fi on your computer is turned on.

• Refresh the network list and select the 'JT_xxxxxx'

network.

• Make sure you've entered the right Wi-Fi key when you connect to

the device. You'll find it on the box or on a sticker under the battery in

the JT Hotspot.

Can't get online when connected to the JT Hotspot

• Make sure your SIM card is active. If the network indicator is red, see

the lights table on page 4.

• Move your JT Hotspot to see if you can get a better signal.

Can't get to the JT Hotspot configuration page

• Check you've entered the right address in your web browser.

Either http://192.168.0.1 or http://m.home.

• Use only one network adapter in your PC.

• Don't use a proxy server.

Wi-Fi key

• You'll find the Wi-Fi key for your JT Hotspot on the box or on a

label under its battery.

• If you've changed the Wi-Fi key, and forgotten it, you need to restore

the factory default settings. To do that, log in to the JT Mobile

Hotspot configuration page, select Settings > Advanced > Reset,

and then click Reset to restore the factory default settings.

JT Hotspot configuration page password

• The default password of the JT Hotspot configuration page

is admin.

• If you've changed the JT Hotspot configuration password,

and forgotten it, you need to restore the device to the factory default

settings. To do that, press both the Power button and the WPS

button together for five seconds until the lights flash off and back on.