American Time SiteSynq IQ Installations- und Betriebshandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Uhr American Time SiteSynq IQ herunter. American Time SiteSynq IQ 19 Seiten. Wireless digital clocks
Seite drucken
Wireless Digital Clocks Owner's Manual
Wireless Digital Clocks Owner's Manual
Digital Single Display Surface Mounting
CAUTION: Risk of Electrical Shock - Disconnect and lock out power to the electrical box before
installing or servicing the clock.
1. Remove the hanger from the clock by pushing the bracket
down and pivoting the studs out of the backplate.
2. Mount the hanger on the wall using the bracket holes, either
directly to the wall or to a single or double gang box.
3. For 110v 3-prong corded clock, run the cord through either cutout on
the top or bottom of the clock and plug into a grounded outlet.
4. For clocks using Molex connections, make electrical connections
(black to hot, white to neutral and green to ground) for the
Molex cable (not wired to the clock) to a non-switched
electrical circuit wiring using UL approved wire nuts. Route
field wiring away from sharp projections and corners.
5. Join the wall and clock Molex together.
6. Seat the bracket spring in the channel on the bottom
rail of the clock. Press down and pivot the hanger studs
into the holes on the backplate, then release.
7. Remove plastic protector from display face.
8. Apply power to the circuit and confirm correct operation.
Digital 2-Sided Display - Ceiling or Wall Mount
CAUTION: Risk of Electrical Shock - Disconnect and lock out power
to the electrical box before installing or servicing the clock.
1. Make electrical connections (black to hot, white to neutral and
green to ground) for the Molex cable (not wired to the clock) to non-switched electrical circuit
wiring using UL approved wire nuts. Route field wiring away from sharp projections and corners.
2. Join the wall/ceiling and clock Molex together.
3. Mount the clock to the ceiling (4" box) or wall (single or double gang box).
4. Remove plastic protector from display face.
5. Apply power to the circuit and confirm correct operation.
Wall mount
17
"
1/4
© American Time
© American Time
5"
10
"
7/8
4", 6-digit shown
Digital Clock Installation
Clock hanger
WALL
Surface mount
Ceiling mount
7