ASTi SOUND+SLEEP SE Benutzerhandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lautsprechersystem ASTi SOUND+SLEEP SE herunter. ASTi SOUND+SLEEP SE 12 Seiten.
Auch für ASTi SOUND+SLEEP SE: Benutzerhandbuch (11 seiten)
Seite drucken
Safety, Warranty, and Certifications
Power Cord Routing
Push the power adapter plug into the Power Jack on the bottom of the
Unit. Slip the cord under the rubber foot by separating the two pieces of
the foot along the slit as shown below. The machine should sit flat on a
table or nightstand if the cord is installed correctly.
Customer Support
If you have problems or questions please contact your reseller, or in the
U.S. go to http://astisupport.com
Safety Instructions
Read and adhere to all safety and operating instructions before use. Keep
this booklet for future reference.
1.
The Unit should be cleaned regularly with a soft, dry cloth. The grill
may be vacuumed to remove excessive dust or particle build-up.
Do not use any liquids or sprays (including solvents,
chemicals or alcohol) or abrasives to clean.
2.
Be careful not to have liquid or particulate material enter the
microphone opening that is just above the Adaptive button.
3.
The Unit should not be used near water, such as a bathtub,
swimming pool, faucet or basin to avoid electrocution.
4.
Be careful to avoid dropping objects or spilling liquids onto the Unit.
If liquid is spilled on the Unit, unplug and turn it upside down
immediately. Allow it to dry thoroughly before plugging it into a wall
outlet again. Following these instructions does not ensure that the
Unit will be operational.
Press Power
Plug into
Power Jack
Separate "Foot" and
thread cable under it
Correct installation
9