Astin Trew AT2-2100 Ihr persönliches Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Ihr persönliches Benutzerhandbuch für Verstärken Astin Trew AT2-2100 herunter. Astin Trew AT2-2100 12 Seiten.

More specifically:

No power to the amplifier: Check the power cord fuse (UK) and AT2-2100 Mains input fuse.

Poor speaker imaging, low bass output: Check the loudspeaker wiring is not connected

out of phase.

No sound output. Check the mute is not switched on.

Remote control not working: Check the remote control batteries.

Hum from speakers: Incorrect grounding, check Mains polarity and grounding on all

connected equipment.

Illuminated mute switch is flashing on and off – turn off the amplifier, count 10 and switch

on again. If the mute switch illumination is still flashing, this may indicate there is either:

(A) too low a mains voltage input, check to see if it is above 200VAC

(B) a fault with one of the loudspeakers or loudspeaker

cable, shorting the +- outputs.

If in doubt, talk to the Dealer who sold you the amplifier for advice.

8. Guarantee

A two-year guarantee is given and is valid from the purchase date of your new Astin

Trew AT2-2100.

This is in respect of any defect in materials or workmanship and you will need to

retain your receipt as proof of purchase. Each Astin Trew product has its own unique

serial number and this is held both at the Dealer who has sold you the goods and at

Astin Trew. All claims should be made through the Dealer who sold you the goods

who will inspect them first to assess the problem.

The two year guarantee excludes:

A. All damage caused by accident, misuse, neglect, incorrect installation or

adjustment, non-authorised repairs, servicing or component replacements.

B. Liability for damage or loss in transit from the Dealer or the

purchaser back to Astin Trew or their authorised local service

agent for the purposes of inspection, repair or replacement.

AT2-2100 V1.0/17.01.2018