Donner SPACLINE DMK 25 Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch für Tastatur Donner SPACLINE DMK 25 herunter. Donner SPACLINE DMK 25 9 Seiten. Mini midi keyboard
Auch für Donner SPACLINE DMK 25: Benutzerhandbuch (8 seiten)
Seite drucken
EDIT
Press [TRANSPOSE +] and [OCTAVE +] at the same time to enter the Edit state , the LED of
[TRANSPOSE +/-] and [OCTAVE +/-] blinking.
CC(ASSIGN):
©
Assign each unit(Touch Bar, PAD, Button, Knob, Slider, Pedal, Keyboard)'s number of
l
the CC(or Note, or PC) message.
Press [CC] to enter CC Assignment state, choose one unit you want to assign , by press
l
or move it , the LED beside it will light:
if you choose K1~K4, the [TRANSPOSE +] blink;
F
if S1~S4, the [TRANSPOSE -] blink;
F
if PEDAL, the [OCTAVE +] blink;
F
if the Keyboard , the [OCTAVE -] blink.
F
Use the number key 0~9 to enter the number like this way: 000, 001, 002,......127.
l
Choose another unit you want to assign one by one before EXIT or ENTER.
l
CN(CHANNEL):
©
Assign each unit's channel.
l
Press [CN] to enter Channel Assignment state, choose one unit you want to assign, the
l
same as above.
Press any blank key (the key without any function on it ) of the Keyboard to choose the
l
Keyboard.
Use the number key 0~9 to enter the number like this way: 00, 01, 01, ......16.
l
Choose another unit you want to assign one by one before EXIT or ENTER.
l
MODE:
©
Assign the mode of the Buttons.
l
Press [MODE] to enter Mode Assignment state, choose one button you want to assign.
l
Use the number key 0~1 to enter the number like this way: 0 or 1.
l
Choose another button you want to assign one by one before EXIT or ENTER.
l
CURVE:
©
Assign the touch curve of PAD or Keyboard.
l
Press [CURVE] to enter Curve Assignment state, choose PAD or Keyboard you want to
l
assign.
Use the number key 0~4 to enter the number like this way: 0,1,......4.
l
EXIT:
Exit the EDIT state without any change.
©
ENTER:
Exit the EDIT state with the change.
©
USBSUPPLY:
5V 100mA