Astonica 50100768 Gebrauchsanweisung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Inneneinrichtung Astonica 50100768 herunter. Astonica 50100768 2 Seiten. Stone ridge 18'' square occasional table

Seite drucken

TABLE RIM WITH GLASS

UPPER LEG

LOWER LEG

ST4*16

CAUTION：　　

Do　 not　 over　 tighten

hardware　 and　 fasteners

Step 1:

With the help of another person,

place tabletop upside down on a

non-abrasive to avoid scratching

the top of the rim or glass. Identify

the upper leg and lower leg. Insert

the lower leg into upper leg.

Step 2:

Note the leg receivers in the table

rim. These leg receivers slide. If

necessary, adjust the leg receivers

into the proper position as shown

in drawing below. Also, if

applicable, position the flat plastic

supports so they are evenly spaced

within the table rim.

Step 3:

Insert the four legs into the leg

receivers bysnapping firmly into

place. Ensure all the legs

are secured in the leg receiver.

Then do the Fig.3. Use the ST4*16

to fix up the legs and leg receiver.

Turn the table in upright position.

The table is now ready for use.

NOTE：　

Figure 3

This　 product　 is　 intended　 for　 residential，　

LEG RECEIVER

non－ commercial　 use．　