Astonica 50101045 Gebrauchsanweisung - Seite 2
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Inneneinrichtung Astonica 50101045 herunter. Astonica 50101045 2 Seiten. Basket weave bench
Seite drucken
PARTS & HARDWARE LIST
PARTS & HARDWARE LIST
DESCRIPTION
PART #
DESCRIPTION
A
Straight Bench Back
B
Wood Seat Slats
C
Cast Iron Legs & Arm Brace
D
Middle Support Bracket
6mm x 32mm Bolt
E
6mm Washer
F
G
6mm Nut
H
Phillips Wood Screw
Plastic Nut Cover
I
A
B
D
E
F
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Caution: Do not over tighten fasteners.
QUANTITY
QUANTITY
C
G
H
I
1
1. (SEE FIGURE 1) Using Bolts (E) washers (F)
and nuts (G) attach one end of the straight
5
bench back (A) to the legs & arm brace (C).
2
bttached the other end of the back to the
second leg & arm brace (C).
1
14
14
14
5
4
2. (SEE FIGURE 2) Attach the wood slats (B)
to the arm and leg support (C) as shown.
Repeat on the other side and do not tighten
bolts until all wood slats (B) are in place and
bench is at 90 degrees with floor.
3. (SEE FIGURE 3) Turn the bench over on a
non-scratch surface and attach middle
support bracket (D) to the wood slats (B)
at the midway point between legs (C) using
wood screws (H). Work from the front to back,
bending bracket (D) as necessary to fit the
contour of the bench.
4. Ensure all fasteners are securely tightened.
Place plastic nut cover over nuts (G) located
on backside of bench, 4-places.
ASSEMBLY INSTRUCTIONS
A
FIGURE 1
B
FIGURE 2
FIGURE 3
E
I
G
F
C
F G I
E
C
E
F
G
H
D