Astonica 50103530 Gebrauchsanweisung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Inneneinrichtung Astonica 50103530 herunter. Astonica 50103530 2 Seiten. Superior leisure 30'' round balcony table

PARTS LIST
PART #
A
Table Top
B
Table Leg
C
Center Brace
D
Bolt
E
Lock Washer
F
Plastic Bolt Cover
G
Hex Wrench
Parts Detail
A
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
ASSEMBLY INSTRUCTIONS
CAUTION: Do not over tighten fasteners.
Install Table Legs
1. (SEE FIGURE 1) Place table top (A) upside down on flat non-scratch surface.
2. Turn one table leg (B) upside down and insert leg into end cap fittings as shown.
Repeat for three remaining table legs.
Install Upper Center Brace
1. Align one center brace (C) with upper mounting hole of the four table legs.
2. Place lock washer (E) onto bolt (D) and insert bolt with washer into upper mounting hole
of one table leg as shown.
3. Next, thread bolt through center brace (C). Using hex wrench (G), loosely tighten bolts.
Repeat step 2 and 3 for four remaining legs.
NOTE: Do not tighten bolts until all three legs are secure.
Install Lower Center Brace
1. Align remaining center brace (C) with lower mounting hole of the four table legs.
2. Place lock washer (E) onto bolt (D) and insert bolt with washer into lower mounting hole
of one table leg as shown.
3. Next, thread bolt through center brace (C). Using hex wrench (G), loosely tighten bolts.
Repeat step 2 and 3 for three remaining legs.
4. With both center braces (C) in place, tighten each bolt a few revolutions at a time,
alternating between bolts in a cross corner "X" fashion.
DESCRIPTION
C
B
D
NOTE: Tightening every other bolt or in a cross fashion will ensure your table is level by
placing equal pressure on each joining bolt.
QUANTITY
5. Cover all bolts with plastic bolt cap (F).
1
Your table is now ready to use.
4
2
8
8
8
1
Figure 1
E
F
F
G
Table Leg Lower
Mounting Hole
F
Table Leg Upper
Mounting Hole
A
D
E
F
D E
D E
F
D
E
C
E
D
F
F
D
E
E
D
F
C
F
E
D
(4 places)
B