Astonica 50105573 Gebrauchsanweisung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Inneneinrichtung Astonica 50105573 herunter. Astonica 50105573 2 Seiten. Springhill 48'' cast aluminum table

Seite drucken

PARTS LIST

PART #

Table Top

Table Leg

Connecting Ring

Adjustable Feet

Threaded Stud, 8mm

Hex Nut, 8mm

Flat Washer, 8mm

Lock Washer

Carefully remove the contents from the package. If any parts are missing do not

attempt to use the product until they have been obtained and correctly installed.

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,

DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT

1-888-424-3354

NOTE: This product is intended for residential, non-commercial use.

DESCRIPTION

QUANTITY

Figure 1

CAUTION: Do not over tighten fasteners.

1. (SEE FIGURE 1) Place table top (A) upside down on flat non-scratch surface.

2. Install threaded studs (E) into table top (A).

3. Turn one table leg (B) upside down and align leg over threaded stud (E).

4. Place flat washer (G) and lock washer (H) onto threaded stud. Attach leg using hex nut (F).

Repeat steps 3 and 4 for remaining table legs. Do not tighten hardware.

5. Install threaded studs (E) into each table leg (B).

6. Align connecting ring (C) between table legs (B) and place connecting ring over threaded studs.

7. Place flat washer (G) and lock washer (H) over each threaded stud, secure using hex nut (F).

Do not tighten hardware.

8. With each leg attached to the connecting ring tighten each hex nut a few revolutions at a time,

alternating between hex nuts in a cross corner "X" fashion.

NOTE: Tightening every other hex nut in a cross fashion will ensure your table is level by

placing equal pressure on each joint.

9. Install adjustable feet (D) at bottom of each table leg (B). Turn table upright.

10. Adjust table legs as needed using the adjustable feet at bottom of each leg. Turn feet by

hand until table is level to the floor.

Your table is now ready to use.

ASSEMBLY INSTRUCTIONS