Astonica 50105596 Gebrauchsanweisung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Inneneinrichtung Astonica 50105596 herunter. Astonica 50105596 2 Seiten. Vista armchair

PARTS & HARDWARE LIST

PART #

Seat

Backrest

Right Arm/Leg

Left Arm/Leg

Threaded Studs

Flat Washers

Lock Washers

Hex Nuts

Acorn Nuts

Adjustable Feet Pad

Parts Detail

Carefully remove the contents from the package. If any parts are missing do not

attempt to use the product until they have been obtained and correctly installed.

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,

DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT

1-800-843-2446.

NOTE: This product is intended for residential, non-commercial use.

DESCRIPTION

QUANTITY

Figure 1

CAUTION: Do not over tighten screws, studs, and bolts. This may result in stripped threads.

1. (SEE FIGURE 1) Install threaded studs (E) into threaded holes of right arm/leg (C)

and left arm/leg (D).

2. Place right arm/leg assembly (C) on one side with threaded studs upward.

3. Align threaded studs of arm/leg (C) with chair back (B) join arm/leg and chair back.

Install mounting hardware, flat washer (F), spring washer (G) and nut (H), hand tighten only.

4. Align seat assembly (A) over threaded studs of right arm/leg assembly (C). Install mounting

hardware flat washer (F), spring washer (G) and domed nuts (I), hand tighten only.

5. Align threaded studs of left arm/leg assembly (D) over seat and chair back. Install mounting

hardware hand tighten only.

6. Stand chair upright and gradually tighten hardware in an "X" pattern.

7. Place chair assembly on one side and attach feet pad (J). Adjust feet pad until chair stands level.

8. Repeat steps 1 through 7 to assembly second chair.

ASSEMBLY INSTRUCTIONS