Astonica Junior ABC Bench Gebrauchsanweisung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Inneneinrichtung Astonica Junior ABC Bench herunter. Astonica Junior ABC Bench 2 Seiten.

Seite drucken
PARTS & HARDWARE LIST
PART #
DESCRIPTION
A
Bench Back
B
Wood Seat Slats
C
Leg & Arm Frame
D
Side Seat Brace
E
6mm x 32mm Bolt
F
6mm x 30mm Bolt
G
6mm x 20mm Bolt
H
6mm Washer
I
8mm Washer
J
Nut
K
Wood Screw
L
Middle Seat Brace
Parts Detail
A
B
H
G
F
E
D
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
NOTE: This product is intended for residential, non-commercial use.
CAUTION: Do not over tighten fasteners.
1. (SEE FIGURE 1) To attach the top of the bench
back (A) to the leg and arm frames (C) use
bolts (E), 4 washers (H) [two on each side of
the bolt] and nuts (J) to the tabs on the top
of the leg and arm frames (C). To attach the
bottom of the bench back (A) to the leg and
arm frames (C) use bolts (E), 4 washers (I)
[two on each side of the bolt] and nuts (J) to
the tabs on the bottom of the leg and arm
frames (C).
C
I
J
K
L
Figure 1
E
J
H
A
H
I
E
1
QUANTITY
1
2. (SEE FIGURE 2) Attach the wood seat slats (B)
to the leg and arm supports (C) using bolt (F),
4
2 washers (H) and nut (J) at each of the tabs
2
on the leg and arm supports (C). Do not tighten
2
bolts until all wood seat slats (B) are in place
and bench is upright on the floor to level it for
4
tightening.
8
2
28
8
14
6
1
3. (SEE FIGURE 3) Turn the bench over on a
non-scratch surface. Attach the middle seat
brace (L) to each of the wood seat slats (B) by
placing the middle seat brace (L) in between
the leg and arm frames (C) at the midway
point. Use the wood screws (K) to secure. You
may need to bend the middle seat brace (L) a
little to make it fit the contour of the slats.
4. (SEE FIGURE 3) Attach the side seat braces (D)
to the leg and arm frames (C) using bolts (G),
2 washers (H) and nuts (J). Connect the side
seat braces (D) to the wood seat slat (B) using
wood screws (K). Ensure all fasteners are
securely tightened.
C
J
I
ASSEMBLY INSTRUCTIONS
Figure 2
B
Figure 3
G
C
2
C
F
H
J
J
H
K
D
B
L