Astonica 04-02-00006 Gebrauchsanweisung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Außen-Brunnen Astonica 04-02-00006 herunter. Astonica 04-02-00006 2 Seiten. Indoor/outdoor garden fountain

Seite drucken
Astonica 04-02-00006 Gebrauchsanweisung
ASSEMBLY INSTRUCTIONS:
1. Put the base of the fountain on a flat level location.
2. Connect the PVC tube (located in the bottom of the top portion of the fountain) to the
top of the pump. Set the flow control on the pump at half way.
3. Set the top of the fountain and the pump in the center of the fountain base.
4. Add clean water to the fountain base until the water level is approximately 90% full.
5. Connect the water pump to the power source. ( If the fountain is splashing or water
flow is to slow, unplug the pump lift the top of the fountain and adjust the flow control
on the pump accordingly.)
Note: To avoid damage to the water pump, always keep pump fully
submerged in water while the pump is on. Add water as
needed to compansate for evaporation. When not in use for
a prolonged amount of time, disconect power and empty the
fountain. Keep the fountain and power cord away from high
temperature and heat sources.