Astonica Flower Fairies Gebrauchsanweisung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Außen-Brunnen Astonica Flower Fairies herunter. Astonica Flower Fairies 2 Seiten. Fountain

Astonica Flower Fairies Gebrauchsanweisung
Parts & Hardware List
KEY
DESCRIPTION
1
Polyresin Base
2
Polyresin Fairy Top
3
UL Listed Pump
4
Rubber Grommet
1
Assembly Instructions
1. See Figure 1. Thread the plug through the
base so that it comes out the notch in the
bottom. Place the rubber grommet (4) around
the plug and place in the tube in the base (1).
Place the pump assembly in the inner cavity
of the base (1).
QUANTITY
1
1
1
1
3
2
4
Figure 1.
3
4
plug
2. See Figure 2. Connect the pump (3) to the
water intake tube inside the flower fairy top
(2). Place the flower fairy top (2) onto
the base (1) aligning the notches in the side
with the notches in the base (1).
1. Do not plug in pump before filling container with water. Doing so may damage pump.
2. Use distilled water, if possible to fill container.
3. To adjust speed of water flow: unplug pump, remove lid, move switch on pump (E)
toward "+" positive to increase water flow, or "-" to decrease water flow.
4. Check water level periodically, add water if necessary.
5. If water is not flowing, check pump (E) or fountain assembly (A) for clogs. Pump may
build up calcium after a long period of time and stop running when tap water is used.
Any calcium remover can be used to clean pump.
1
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
Figure 2.
2
1
Pump Care & Maintenance
1-888-424-3354.
3