AmeriGlide AMGHERC600-4 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Mobilitätshilfe AmeriGlide AMGHERC600-4 herunter. AmeriGlide AMGHERC600-4 12 Seiten. Vertical platform lift

Seite drucken
This RPL meets ASME A18.1 safety standards. However, ensure that you and
•
those servicing this product follow all safety procedures.
Do not disable any safety equipment or switches supplied with this lift.
•
Lock wheelchair brakes before operating lift.
•
Stay away from all drive train components while the lift is operating.
•
Do not exceed the maximum payload capacity of 600 lb.
•
Do not ride on the lift until it is anchored in place.
•
It is recommended that a gate or door be installed at the upper landing.
•
This product is designed only for lifting people and mobility devices. Do not use
•
for any other purpose.
Ensure that this lift is always disconnected from the electrical source before
•
servicing.
Loose clothing or jewelry should never be worn by a person working on the lift.
•
The lift requires a 120 VAC 15 AMP grounded, dedicated electrical outlet within
•
6' of the lift. Plug the lift directly.
All electrical must meet NFPA70 (National Electrical Code)
Smooth vertical fascia is a requirement by ASME A18.1 safety standard.
Warning
Moving components can cut and crush. Do NOT operate the lift if you or anyone else is
in close proximity to any drive components. Be aware that loose clothing or jewelry may
catch on moving parts.
The area between the floor where the lift is mounted and the top landing must be
covered by a smooth vertical fascia to eliminate pinch points between the platform and
landing.
Hercules II 600 Vertical Platform Lift Owner's Manual | www.Ameriglide.com | 866-378-6648
6 //
12
P/N: 610-00018 RevC 11819