Astonica 40100038 Gebrauchsanweisung - Seite 3

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Grill Astonica 40100038 herunter. Astonica 40100038 3 Seiten. Patio fireplace grill

Seite drucken
HARDWARE LIST
PART #
DESCRIPTION
Screws
1
Screws For Bracket
2
Flat Head Screws
3
Nuts
4
Acorn Nuts
5
Washers
6
Spacer
7
8
Wrench
1
2
5
6
Carefully remove the contents from the package.
If any parts are missing do not attempt to use the product until
they have been obtained and correctly installed.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER.
1-888-424-3354.
CAUTION
• Do not use liquid fire starter, charcoal lighter or any other combustible liquid to
start the fire.
• Read and follow all safety instructions specified by the manufacturer of the charcoal
and/or fire starters you are using.
WARNING PRACTICE FIRE SAFETY AT ALL TIMES
1. USE WITH ADULT SUPERVISION ONLY. KEEP OUT OF THE REACH OF CHILDREN.
2. DO NOT LEAVE UNATTENDED WHILE BURNING OR SMOLDERING
3. DO NOT PLACE NEAR FLAMMABLE OR COMBUSTIBLE MATERIALS WHEN BURNING.
4. OUTDOOR USE ONLY.
5. KEEP AWAY FROM OVERHANGS, TREES, ETC.
6. DO NOT USE ON BALCONIES OR WOOD DECKS.
7. KEEP A FIRE EXTINGUISHER WITHIN REACH AT ALL TIMES
8. TAKE CARE NEVER TO TOUCH METAL SURFACES AFTER A FIRE HAS BEEN LIT FOR AT LEAST
3-4 HOURS AFTER FIRE IS OUT OR UNTIL THOROUGHLY COOLED.
THEN WEAR GLOVES TO PROTECT YOURSELF.
QUANTITY
12
2
6
14
6
20
2
1
3
4
7
8
CONTACT CUSTOMER SERVICE AT
2
ASSEMBLY INSTRUCTIONS
1.
(SEE FIGURE 1)
Locate fire pit bowl (A), attach
four legs (B) to fire pit bowl (A) using screws
(1), washers (6) and nuts (4).
2.
(SEE FIGURE 2)
Locate three outer rails (D),
insert ends of rails together, attach rails
to fire pit bowl (A) at one time using screws
(1), washers (6) and nuts (4). Place cooking
grate (C) on te fire pit bowl.
3.
(SEE FIGURE 3)
Assemble screen lid (E) and
screen lid (F) using screws (3), washers
(6) and nuts (5). Note the screws (3) go
upwards with the nuts (5) on top. Assemble
screen lid (G) and screen lid (H) using
screws (3), washers (6) and nuts (5). Note
the screws (3) go downwards with the
nuts (5) on the top.
FIGURE 1
A
B
FIGURE 2
4
6
1
A
5
FIGURE 3
6
F
E
3
G
3
1
6
4
C
D
H