Amerihome HS07567 Montage- und Betriebsanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Montage- und Betriebsanleitung für Fritteuse Amerihome HS07567 herunter. Amerihome HS07567 8 Seiten. 3 qt deep fryer

Seite drucken

After cleaning the fryer parts separately, reassemble the fryer for easy storage by placing the oil pan into the fryer

base, sliding the heating element and control panel assembly into the grooves at the back of the base, and pushing

the heating element firmly to the bottom of the oil pan. The fryer will not operate unless the heating element assembly

has been inserted correctly into the fryer base. Place the fryer basket all the way down into the oil pan.

The handle can be separated from the fryer basket to accommodate a smaller storage space. To remove the handle,

squeeze the metal tines of the handle together and rotate to disengage from the fryer basket.

Troubleshooting

Symptom

I cannot achieve a golden brown

color or crispy texture on the food

I am frying

The fryer will not turn on, or heat

up the oil.

HS07567 3 Qt Deep Fryer Assembly & Operation Instructions

•

Check the temperature of the oil. The temperature may be set too low, or

the food has not been fried long enough. Check the food package,

recipe, or the recommended frying times chart for recommendations of

frying time and temperature

•

You may have too much food in the fryer. Adding too much food at one

time can lower the temperature of the oil, and result in uneven and

unreliable frying. Try again adding less food to the fryer. No more than a

single layer of food, or the amount recommended on the Frying Times

Chart should be added at one time.

•

More oil may need to be added to the fryer. Check that the fryer has

enough oil in the oil pan.

•

Check the power cord connection at both the fryer base, and at the wall

plug. The power cord must be securely and correctly attached at the

fryer base for the fryer to operate.

•

Make sure that the temperature dial has been set to the desired

temperature. Give the fryer at least 10 minutes to heat up the oil.

•

Check that the heating element has been correctly and completely set

into the fryer base. Incorrect assembly could cause the fryer to not

function properly.

•

Try resetting the fryer. This fryer is equipped with a sensor feature that

will automatically shut down the heating element if it overheats. Using

old think oil, or frying without enough oil in the oil pan can cause the

appliance to overheat. Turn the temperature control dial back down to 0º,

unplug the unit from the wall and allow the fryer to cool completely (this

could take 3-4 hours). Add the correct amount of oil to the oil pan, and

trip the reset button on the back of the heating element assembly, by

inserting a small pointed item, such as a paper clip.

Potential Cause & Solution