Ameriphone DIALOGUE XL 50 Betriebsanleitung - Seite 8
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Telefon Ameriphone DIALOGUE XL 50 herunter. Ameriphone DIALOGUE XL 50 15 Seiten. Ameriphone xl50: product brochure
Auch für Ameriphone DIALOGUE XL 50: Eigenschaften (2 seiten)
Seite drucken
Using Your Dialogue XL-50
Incoming Voice Volume
You can adjust the volume of incom-
ing calls by simply sliding the VOL
control. This gives you up to 18 dB.
If you want more amplification, follow
the directions below.
1. Press the AMPLIFY button as
shown in Figure 8 to turn the
incoming voice amplifier on or off.
When AMPLIFY is on, the
AMPLIFY indicator comes on.
*
HOLD
PROG
TONE
LO
Figure 8 - AMPLIFY Button
2. Adjust the volume in the ear piece
by moving the VOL slide control in
Figure 9. With AMPLIFY on,
incoming volume will be up to
48dB louder.
*
HOLD
PROG
TONE
LO
Figure 9 - Volume Slide Control
6
0
#
P
E
FLASH
REDIAL
AMPLIFY
VOL
HI
and Indicator
0
#
E
FLASH
REDIAL
AMPLIFY
VOL
HI
Repeated incremental expo-
Caution:
sure to amplification levels greater
than 18 dB may be harmful to indi-
viduals without hearing disabilities.
Therefore, do not remove the warning
label attached to the back of the
handset. If it is likely that a visually
impaired person will use the tele-
phone, securely attach the provided
warning printed in Braille to the back
of the handset (See, Diagram A).
Diagram A.
Note: In standard use, the amplifier
turns off whenever you hang up the
telephone. This is a useful feature if
many people use the phone. If you
want the amplifier to always remain
on, slide the Volume Reset Override
switch on the back of the phone to
ON, as shown in Figure 10.
- OFF
MANUAL
AUTO
- ON
Volume
Reset
Override
Figure 10 - Volume Reset Override On/Off