Astoria 33WM0194 Gebrauchsanweisung beiliegend - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung beiliegend für Innenkamin Astoria 33WM0194 herunter. Astoria 33WM0194 20 Seiten. Electric fireplace mantel

Seite drucken
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 60 Minutes
Tools Required for Assembly (not included): Phillips head screwdriver, scissors and utility knife
ASSEMBLY INSTRUCTIONS
1. Locate the Center Front Panel (D), RH Front Panel
(C) and LH Front Panel (B) and set out face down
on a scratch-free surface.
Insert one Wood Dowel (CC) into each of the
pre-drilled holes.
Push the RH Front Panel and LH Front Panel
snug to the Center Front Panel. Make sure the
Wood Dowels are seated in the pre-drilled holes.
Insert Bolts (AA) and Washers (BB) into the holes in
the mounting blocks.
HAND TIGHTEN ONLY.
Hardware Used
AA
Bolt
BB
Washer
CC
Wood Dowel
2. Locate Hearth/Base (A) and set out finished side up
on the floor.
Insert one Wood Dowel (CC) into each of the
pre- drilled holes.
Attach the completed Front panel assembly from
step 1 to the Hearth/Base (A). Make sure the dowels
are seated into the pre-drilled holes in the
Hearth/Base. Using Bolts (AA) and Washers (BB)
attach panels through pre-drilled holes in the
mounting blocks.
HAND TIGHTEN ONLY.
Hardware Used
AA
Bolt
BB
Washer
CC
Wood Dowel
Fig. 1
x 6
x 6
x 4
Fig. 2
x 2
x 2
x 4
4
D
C
CC
BB
AA
A
B
AA
BB
CC