Door Entry Direct KDC260PCM Installationshandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Installationshandbuch für Kontrolleinheit Door Entry Direct KDC260PCM herunter. Door Entry Direct KDC260PCM 6 Seiten. Stand alone access control unit for 2000 users
Seite drucken
1 Locating the control unit
The DC260 control unit should be fitted close to the door
through which you wish to control access. It should be
on the secure side. When programming the unit, you will
need access to both the reader and controller,
therefore you should arrange them reasonably close
together.
OUT - built-in "EXIT" reader
3 Egress button
Pressing the egress button (push to make switch) will
operate the door opening timer. The timer starts when
the button is pressed and released, a time clock may be
used for real time door unlocking.
2 Connecting the reader
The DC260 can control access both in and out of the
controlled door when using the built-in "EXIT" reader with
the external UPR reader.
The distance between the UPR reader and the controller
can be extended up to 25 meters using BEL9536 cable or
equivalent.
N/C Orange
COM Purple
N/O Blue
Black GND
Black
Red +12V DC
Red
Brown D_IN
Yellow OPEN
Grey ALARM
White D1
White
Green D0
Green
N/C Orange
COM Purple
N/O Blue
Black GND
Red +12V DC
Brown D_IN
Yellow OPEN
Grey ALARM
White D1
Green D0
IN - external UPR reader
Common
Push to brake
Push to make