Amerisun PowerSmart DB7651 Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch für Werkzeuge Amerisun PowerSmart DB7651 herunter. Amerisun PowerSmart DB7651 6 Seiten. Auger belt tension adjustment
Seite drucken6. Remove the belt from the drive pulley while pulling
the right side of the auger housing away from the main
frame just enough to access the belt and auger pulley.
7. Push the auger tension pulley arm to move the auger
brake away from the belt to allow removal of the belt.
1. Auger Brake
8. Remove the auger belt.
Auger Belt Installation – DB7651
WARNING Entanglement Hazard -
performing any service procedures, make sure the
engine is off and remove the spark plug wire from the
spark plug to ensure the engine cannot accidently start.
NOTICE: Before installing the auger belt, see Auger Belt
and Related Component Inspection and repair or
replace any components as required.
1. Inspect the new belt to ensure it is the correct size
and type.
Original - Gates Truflex G 4LXP885
Alternate – MTD 954-0101A
2. Push the auger tension pulley arm to move the auger
brake to allow access for installation of the belt into the
auger pulley.
1. Auger Brake
3. Route the belt to the inside of the tension pulley and
install the auger belt onto the drive pulley while pulling
the auger housing into position with the main frame.
Rev 1.0 4-11-13
Before