Doorentryonline TC365 Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Zeitmessgeräte Doorentryonline TC365 herunter. Doorentryonline TC365 2 Seiten. Time clock with automatic daylight saving operation

Seite drucken

PROGRAMMING

The TC365 is programmed using only 3 buttons. Each button has the following function

PROG (Yellow) used to enter program mode and to step through program items

UP (Black) replaces the date with the day of week during normal operation. Increments the flashing item in

program mode

DOWN (Grey) overrides the relay output On to Off or vice versa during normal operation. Decrements the

flashing item in program mode

If during program mode no button is pressed for 1 minute the clock automatically reverts to the time display

STEP BY STEP PROGRAM GUIDE

Setting the Time

Press the PROG (Yellow) button once to enter programming mode. The display will show TIME ? followed by

the present time setting (HH:MM) the hour digits will be flashing

Use the UP (Black) / DOWN (Grey) buttons to select the correct hour in 24 hour format (0-23). When the

correct hour has been selected press the PROG button to advance to the minutes. The hour digits will stop

flashing and the minute digits will start flashing. Use the UP / DOWN buttons to select the correct minutes (0-

59). When the correct time is displayed press the PROG button

Setting the Date

The display will show DATE ? followed by the present date setting (DD/MM/YY)

The day digits will be flashing. Use the UP / DOWN buttons to select the correct day of month (1-31). When

the correct day is shown press the PROG button to advance to the month. The month digits will start flashing

and the day digits will stop flashing. Use the UP / DOWN buttons to select the correct month (1-12). When the

month is correct press the PROG button to advance to the year

The year digits will start flashing and the month digits will stop flashing. Use the UP / DOWN buttons to select

the correct year (0-99)

When the correct date is displayed press the PROG button

NOTE it is important that the date is set correctly for correct daylight saving operation

Setting Time Zones

The display will show ZONE 1 followed by the present ON / OFF setting

Use the UP button to turn the time zone ON or the DOWN button to turn the time zone OFF

Press the PROG button

If the time zone is turned OFF the display will move to the next time zone

If the time zone was switched ON the display will show START followed by the present start time setting

Use the UP / DOWN and PROG buttons to select the correct time as described in the section setting the time

When the correct time is displayed press the PROG button. The display will show STOP followed by the

present stop time setting

Use the UP / DOWN and PROG buttons to select the correct time as described in section setting the time

When the correct time is displayed press the PROG button

The display will show the present setting for day of operation use the UP / DOWN buttons to select when the

time zone is to operate this can be set for individual days, weekends only, weekdays only or everyday

When the correct option is displayed press the PROG button. Repeat above for all time zones

NOTE when programmed if the time falls within a programmed time zone on period the relay will not

switch ON. Use the override (GREY) button to turn the relay ON. After this the relay will operate normally

with the programmed time zones