Dabi Atlante Ultraled Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Handbuch für Medizinische Ausrüstung Dabi Atlante Ultraled herunter. Dabi Atlante Ultraled 11 Seiten. Curing light and bleacher

Seite drucken

Dabi Atlante Authorized Service

Network

Maintenance service for Dabi Atlante equipment

must be given by Dabi Atlante Authorized Technical

Assistance, otherwise warranty will be compromised.

Use the attached insert or access the website

www.dabi.com.br to find the nearest Dabi Atante

Authorized Technical Assistant.

Symbols

Use the icons below to identify the symbols on your

equipment:

"Fragile" – Located on the packaging

side. It determines that equipment

must be carefully transported in order

to prevent falls or shocks.

"Protect against humidity" – Located

on the packaging side. It determines

that the equipment must be protected

against any type of humidity during

transportation and storage.

"This side up" – Located on the

packaging side. It determines that

the packaging must be handled by

keeping the side shown by the arrow

facing upwards.

"Maximum piling" – Located on

the packaging side. It determines

the maximum number of boxes that

can be piled up during transportation

and storage.

"Temperature limit" – It determines

the temperature limits at which

the equipment must be stored or

transported.

Troubleshooting

Fault

Equipment will not start

Equipment will not cure

Technical responsibility by: Leonel Issa Halak – CREA-SP 0600256918

Voltage

Frequency

Power

Light Source

Light wavelength

Light intensity

Light guiding tip

*In the operation conditions specified on this Manual

Cause

There is no power supply

LED is burned out

Obstruction of the light guiding tip

Final recommendations

In order to ensure greater durability for your

equipment, use only original Dabi Atlante

replacement parts, which are in accordance with

the technical standards and specifications required

by the manufacturer. Also, use only the services

provided by the Dabi Atlante Authorized Technical

Assistance Network as it counts on trained assistants

and specific tools for the appropriate maintenance

of your equipment.

Equipment Warranty

This equipment's warranty covers manufacturing faults

for a period of 12 months starting on the date of its sales

receipt issuance in the name of its first owner.

Reasons for warranty voidance:

•

Installation and/or operation in disagreement

with the instructions in this manual.

•

Falls.

Items that are not covered by warranty:

•

Technicians' travel expenses and equipment

transportation expenses for technical assistance.

•

Damage to external finishing and/or accessories

that has not been caused by the manufacturer.

Note

In case technical assistance is required during the warranty

coverage period, the sales receipt must always be

presented to the technician providing such service.

Technical features

Specification

Solution

Await for power supply normalization

or call for technical assistance

Replace the head

Replace and clean it

Ultraled

100-240Vac

50/60Hz

10VA

460-490nm

>500mW/cm²*

ø 10 mm angle: 60°