DoorHan SMARTROLL Programmieranleitung Handbuch - Seite 11
Blättern Sie online oder laden Sie pdf Programmieranleitung Handbuch für Controller DoorHan SMARTROLL herunter. DoorHan SMARTROLL 12 Seiten. Control board
Seite drucken
3.4. REMOTE PROGRAMMING OF CONTROLS WITH DOORHAN MULTI-CHANNEL REMOTE CONTROLS
1. Press the button located on the rear side of the multi-channel control. This button makes the control board enter the re-
mote control recording mode (a short beep will sound, and the "Remote" indicator will light up), provided that the remote
control was previously recorded in the control board.
2. On a new remote control press twice the button, that you wish to operate your rolling shutter. A short beep will sound, the
"Remote" indicator will flash once to confirm the remote control code has been recorded.
NOTES:
Perform remote control programming within the receiver working range.
The number of each button can be determined by the number of dots on the remote control body.
1
3
4
3
2
1
1
4
2
2
REMOTE CONTROL PROGRAMMING
1
2
11