Astralpool SLX Detaillierte Anweisungen - Seite 4

Blättern Sie online oder laden Sie pdf Detaillierte Anweisungen für Unterwasserbeleuchtung Astralpool SLX herunter. Astralpool SLX 6 Seiten. Underwater niche lights for fibreglass pools
Auch für Astralpool SLX: Installations- und Betriebsanleitung (6 seiten), Schnellstart-Handbuch (4 seiten), Installationsanleitung Handbuch (7 seiten), Einbauanleitung (4 seiten)

To customise the colour or pattern

The colour or pattern that your lights display is able to be customised to your satisfaction. You can

control the intensity of your light, choose a custom colour (other the inbuilt pre-sets) and create a custom

pattern.

To customise the light intensity

There are three levels of intensity: high, medium and low. This intensity is used in all colours and

patterns. By default, your light will use High intensity.

To change the intensity, follow these steps:

1. Using the steps outlined above, change the light's colour selection to White.

2. Turn off the light and wait for at least three seconds.

3. Turn on the light and within two seconds perform a single switch sequence.

4. To indicate that you have entered "Intensity Configuration" mode, the light will flash every

second using the White colour at high intensity level.

5. To select the next intensity level (high → medium → low → high, etc.), perform a single switch

sequence and wait at least three seconds.

6. To save your selected intensity, perform a double switch sequence.

The intensity selection applies to all colours and patterns. The "synchronise" operation detailed above

will not impact your intensity selection. If you have multiple lights using the same power switch,

modifying the intensity level will set all those lights to the same newly selected intensity, even if they

were different originally.

To choose a custom colour

In addition to the pre-set fixed colours (Blue, Magenta, Red, Orange, Green, Aqua and White), you can

choose a unique custom colour for your lights to display. This is achieved by entering a special

configuration mode; the lights will display a continually changing spectrum of colours and you simply

have to make your selection when the desired colour is shown.

To change your customised colour, follow these steps:

1. Using the steps outlines above, change the light's colour selection to "Customised Colour" (i.e.

one selection after White).

2. Turn off the light and wait for at least three seconds.

3. Turn on the light and within two seconds perform a single switch sequence.

4. The lights are now in "Colour Customisation" mode. The lights will begin varying their colour

smoothly through Red, Orange, Yellow, Green, Aqua, Blue, Magenta, Mauve, Warm White, Cool

White, Pastel Blue, Baby Blue, Pastel Green, Light Yellow and Pink. Each colour is shown for

two seconds, before smoothly changing to the next over a period of six seconds.

5. When your desired colour is displayed, make your selection by performing a double switch

sequence.

Your selected colour is saved into memory. Next time you choose the Customised Colour selection, your

selected colour will be displayed. Since you may select when two adjacent basic colours are mixing

gradually, hundreds of colours are available for your customised colour.

8s 16s 24s 32s 40s 48s 56s 64s 72s 80s 88s 96s 104s 112s 120s

(The colours shown above are for indication only.)

Inst.374 Astral Pool SLX Light Detailed Instructions V10.15