Canon PIXMA MP810 Benutzerhandbuch

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Alles in einem Drucker Canon PIXMA MP810 herunter. Canon PIXMA MP810 2 Seiten. Personal printing guide
Auch für Canon PIXMA MP810: Schnellstart (1 seiten), Ergänzendes Handbuch (6 seiten), Schnellstart-Handbuch (38 seiten), Service-Handbuch (20 seiten)

Seite drucken

Start Here

Easy Setup Instructions

Unpack the Machine

• Please conﬁ rm the included items against the illustration printed on the lid of the packing box.

• A USB cable is necessary to connect the machine with your computer.

QT5-0786-V01

Prepare the Machine

Place the machine on a ﬂ at and

Use the { or } button on the

horizontal surface, and do not place

Operation Panel to select the language

any objects in front of the machine.

for the LCD, then press the OK button.

Open the Sheet Feeder Cover and

pull the Paper Support, then the Paper

Output Tray and open the Output Tray

Extension.

Caution

Before turning on the machine, remove all of the

(1) Press the { or }

shipping tapes.

Important

Do not connect the USB cable until after the soft-

ware is installed.

(2) Press the OK

Note

To open the Paper Output Tray, put your ﬁ nger in the

rounded indent of the tray and open it gently.

Important

If an unintended language is displayed on the

LCD, press the Back button to return to the Lan-

guage selection screen.

Once the message "Install the print head and

set the ink tank." appears, go to f.

Open the Scanning Unit (Printer Cover)

until it locks into place. The Print Head

Holder moves to the center.

Unlock the Scanning Unit (Printer

Cover).

(1) Open the Document Cover.

(2) Move the Scanner Lock Switch towards the

release mark to unlock the Scanning Unit (Printer

Cover).

Caution

● Make sure to unlock the Scanning Unit (Printer

Cover) before turning the machine on.

● Before transporting the machine, always lock

the Scanning Unit (Printer Cover) by moving the

Scanner Lock Switch towards the lock mark.

(2)

(1)

Scanning Unit (Printer Cover)

Important

● For your safety, always firmly grip the areas illus-

Plug the power cord in the back of the

trated when opening the Scanning Unit (Printer

machine and connect the other end to

Cover).

the wall outlet.

● If the Document Cover is opened, you cannot

open the Scanner Unit (Printer Cover). Be sure

to open the Scanner Unit (Printer Cover) and the

Document Cover at the same time.

Open the Inner Cover. Write down

the serial number located inside the

machine. You will need this to register

your product.

Important

Make sure that the Document Cover is closed.

Open the Operation Panel, then press

the ON/OFF button to turn on the

machine.

Install the Print Head

Remove the Print Head from its

package.

Caution

There may be some transparent or light blue ink

button to select the

on the inside of the bag the print head comes in,

language.

or the inside of the protective cap - this has no

effect on print quality. Be careful not to get ink on

yourself when handling these items.

button.

Remove the orange protective cap from

the Print Head and discard it.

Protective Cap

Note

Do not touch the print head nozzles and the electrical

contacts.

Firmly raise the Print Head Lock Lever

until it stops.The Print Head Lock Lever

may feel heavy.

Insert the Print Head.

Do not touch!

Push the Print Head to hold it in place,

and lower the Print Head Lock Lever.

Important

If the Scanning Unit (Printer Cover) is left open

for more than 10 minutes, the Print Head Holder

moves to the right. Close and reopen the Scanning

Unit (Printer Cover) to return the Holder to the

Inner Cover

Serial Number Location

center.

Install the Ink Tanks

Peel back the orange tab completely

and remove the plastic wrapper from

the ink tank.

If the orange-colored protective ﬁ lm is not removed

completely, problems with printing may occur.

Twist off and discard the orange

protective cap located on the bottom of

the ink tank.

Protective Cap

Do not press!

Electrical Contacts

Important

• Do not touch the electrical contacts.

• Do not touch the ink port.

Insert the ink tank into the right-hand

Print Head Nozzles

slot and press the

mark on the ink

tank until it clicks into place.

Make sure the ink lamp lights red.

Refer to the color

guide on the Print

Head Lock Lever.

Close the Inner Cover and the

Scanning Unit (Printer Cover).

Important

• For your safety, always firmly grip the areas il-

lustrated when closing the Scanning Unit (Printer

Cover).

• The machine starts operating. Wait about 2 min-

utes until the machine stops making noise.

Align the Print Head

Pinch the Paper Guide and slide it to

the left end.

Paper Support

Extension

Paper Guide

Ink Port

Load two sheets of supplied paper

(MP-101) into the Auto Sheet Feeder

with the printing side (whiter side)

facing up, align the paper with the right

side of the Cover Guide, then slide the

Paper Guide against the paper stack.

Paper Guide

Print Side

Cover Guide

Make sure that Yes is selected in the

message requesting head alignment,

then press the OK button.

Note

Print Head alignment takes about 14 minutes to

complete. Do not start another operation here.

The pattern is printed. And Print Head is aligned

automatically.

Note

• The pattern is printed in black and blue.

• When Automatic Print Head Alignment cannot be

executed correctly, the message "Auto head align

has failed." is displayed on the LCD. Refer to "Error

Message is Displayed on the LCD" in the User's

Guide on-screen manual.

Ofﬁ ce All-In-One

Hardware setup and Print Head

alignment is complete.

Easy-Scroll Wheel

Turn the Easy-Scroll Wheel

left or right to easily select

a menu or a setting item.

For details, refer to "Basic

Operation for the Operation

Panel" in the Quick Start

Guide.

* You can also use the

{

}

[

, or

]

button to

select.

Cassette

For information on how to load paper in the

Cassette, refer to "Loading Paper in the

Cassette" in "Loading Printing Paper" of the

Quick Start Guide.