DoorKing 1815-250 Schnellstart-Handbuch

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Intercom System DoorKing 1815-250 herunter. DoorKing 1815-250 2 Seiten. Wiegand keypad / card reader

Seite drucken

Wiegand Keypad / Card Reader

These instructions apply to the following DoorKing Products: 1815-247, 1815-248, 1815-249, 1815-250 with circuit

board P/N 1515-009.

When used to control entry through an automated vehicular gate system, the keypad / card reader must be

mounted a minimum of 10-feet away from the gate and gate operator, or mounted in such a way that the

person using the keypad cannot come into contact with the gate or gate operator.

Both the keypad and card reader output their data in a 26-bit wiegand format and must be connected to an access

controller such as the DKS models 1833, 1835, 1837 or 1838. Each device operates independently of each other.

1 Common (Black)

2 Power (Red)

3 Earth Ground

4 Wiegand Common

5 Not Used

6 Data 0 (Green)

7 Data 1 (White)

8 Not Used

1815-864-B-3-16

1 2 3 4 5 6 7 8

Gray

12-24 Volt AC or DC

Orange

12-24 Volt AC or DC

Green

Data 0

White

Data 1

To Access Controller

Black

Common

Red

Power

Keypad OR Card opens door/gate

Connect the keypad terminals to the card reader terminals (Red,

Black, Green, White) and then connect to access controller.

Keypad AND Card opens door/gate

Each device must have separate weigand wire runs to the

controller with each device operating a different controller relay.

Relay contacts are wired in series to device to be controlled.

Suggest setting relay strike times to 5 sec.

Keypad / Card opens different doors/gates