dacell DN-15W Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Messgeräte dacell DN-15W herunter. dacell DN-15W 16 Seiten. Digital indicator

(Currently the value is indicated.)

2) Zero and Span Setting

Press Up key about 3 seconds to return to Real-weight Calibration mode.

Leave the sensor free-load and press ENT key to set Zero.

Press Up key to be

Press ENT key, It uses

value. (Standard weight value it was prepared).

Press ENT key

Press ENT key to set SPAN value.

If you want to get out of the setting mode and return to the measurement mode,

you may have to push the Function key.

※ If, when

is indicated or with Real-weight value different case, to repeat the

above statement.

3) Shunt CAL data

After finishing Real-weight Calibration, eliminate standard weight

and make display " 0 " .

When indicator displays "0", you turn on S.CAL S/W in back panel.

this then, indicator displays Shunt CAL data in front panel.

Please record Shunt CAL data .

Date

※ note)Please turn off SHOUT CAL S/W after recording Shunt CAL data.

4) Shunt CAL data calibration

Press Up key about 3 seconds to return to Real-weight Calibration mode.

Leave the sensor free-load and press ENT key to set Zero.

Press Up key to be

Press ENT key, It uses

Shift key and

, put counterweight on.

S.CAL data

Shift key and

Up Key and it inputs Real-weight

Up Key and it inputs Shunt CAL data.